PartsTable
Technical Data Sheet
PartsTable / COMPONENT / GD1011-2
GD1011-2 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, first_end_style: CHAMFERED, second_end_style: RADIUS, pin_overall_length: 0.625 INCHES NOMINAL IN, pin_overall_diameter: 0.1880 INCHES NOMINAL IN, first_end_taper_angle: 5.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-209-6978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GD1011-2
NSN: 5315-00-209-6978
FSC: 5315
CAGE: 70276 — ALLEN MFG CO SUB OF CHICAGO PNEUMATIC TOOL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
first_end_styleCHAMFERED
second_end_styleRADIUS
pin_overall_length0.625 INCHES NOMINAL IN
pin_overall_diameter0.1880 INCHES NOMINAL IN
first_end_taper_angle5.0 DEGREES NOMINAL
first_end_taper_length0.062 INCHES NOMINAL IN
second_end_corner_radius0.047 INCHES NOMINAL IN
second_end_relationship_with_first_endNOT IDENTICAL
NSN5315-00-209-6978
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: GD1011-2 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PIN OVERALL LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 5.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
PIN OVERALL DIAMETER: 0.1880 INCHES NOMINAL IN
•
SECOND END STYLE: RADIUS
•
SECOND END CORNER RADIUS: 0.047 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.625 INCHES NOMINAL IN
FIRST END TAPER ANGLE5.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
PIN OVERALL DIAMETER0.1880 INCHES NOMINAL IN
SECOND END STYLERADIUS
SECOND END CORNER RADIUS0.047 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
251419Interchangeable
interchangeable cross-reference
interchangeable
60-4-14Interchangeable
interchangeable cross-reference
interchangeable
DHInterchangeable
interchangeable cross-reference
interchangeable
326EInterchangeable
interchangeable cross-reference
interchangeable
07-72F2Interchangeable
interchangeable cross-reference
interchangeable
07-855005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy GD1011-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GD1011-2?
GD1011-2 is a PIN,STRAIGHT,HEADLESS.
What parts can replace GD1011-2?
There are 7 known substitutes for GD1011-2: 251419, 60-4-14, DH and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for GD1011-2?
GD1011-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-209-6978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GD1011-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026