PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 60-4-14
60-4-14 ✓ Verified by PartsTable
Legrand · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The 2TB Hot-Swap PX desk/Rack se is a Legrand industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, shaft_type: ROUND SINGLE ACTUATOR, head_height: 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN, shaft_length: 0.750 INCHES NOMINAL SINGLE ACTUATOR IN, thread_class: 2A A. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-209-6978, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
60-4-14
NSN: 5315-00-209-6978
FSC: 5315
CAGE: 70276 — ALLEN MFG CO SUB OF CHICAGO PNEUMATIC TOOL CO (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
shaft_typeROUND SINGLE ACTUATOR
head_height0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM IN
shaft_length0.750 INCHES NOMINAL SINGLE ACTUATOR IN
thread_class2A A
pole_quantity4 SINGLE SECTION FRONT
terminal_typeTAB, SOLDER LUG
thread_length0.250 INCHES NOMINAL SINGLE MOUNTING FACILITY IN
shaft_diameter0.250 INCHES NOMINAL SINGLE ACTUATOR IN
throw_quantity3 SINGLE SECTION REAR
fastener_length1.500 INCHES NOMINAL IN
NSN5315-00-209-6978
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 60-4-14 · Legrand ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
2TB Capacity
•
PIN OVERALL LENGTH: 0.625 INCHES NOMINAL IN
•
FIRST END TAPER ANGLE: 5.0 DEGREES NOMINAL
•
FIRST END STYLE: CHAMFERED
•
FIRST END TAPER LENGTH: 0.062 INCHES NOMINAL IN
•
SECOND END RELATIONSHIP WITH FIRST END: NOT IDENTICAL
•
PIN OVERALL DIAMETER: 0.1880 INCHES NOMINAL IN
•
SECOND END STYLE: RADIUS
•
SECOND END CORNER RADIUS: 0.047 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
PIN OVERALL LENGTH0.625 INCHES NOMINAL IN
FIRST END TAPER ANGLE5.0 DEGREES NOMINAL
FIRST END STYLECHAMFERED
FIRST END TAPER LENGTH0.062 INCHES NOMINAL IN
SECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
PIN OVERALL DIAMETER0.1880 INCHES NOMINAL IN
SECOND END STYLERADIUS
SECOND END CORNER RADIUS0.047 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
251419Interchangeable
interchangeable cross-reference
interchangeable
60-4-14Interchangeable
interchangeable cross-reference
interchangeable
DHInterchangeable
interchangeable cross-reference
interchangeable
326EInterchangeable
interchangeable cross-reference
interchangeable
07-72F2Interchangeable
interchangeable cross-reference
interchangeable
07-855005Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 60-4-14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 60-4-14?
60-4-14 is a 2TB Hot-Swap PX desk/Rack se manufactured by Legrand.
What parts can replace 60-4-14?
There are 8 known substitutes for 60-4-14: 251419, 60-4-14, DH and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 60-4-14?
60-4-14 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-209-6978. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 60-4-14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026