PartsTable
Technical Data Sheet
Download PDF

GA11014 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

GA11014: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, cross-sectional_height: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, end_item_identification: TRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E; PROPULSION SYSTEMS. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-292-1464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
GA11014
NSN: 5331-00-292-1464
FSC: 5331 — O-ring
CAGE: 01843 — AMBAC INTERNATIONAL CORPORATION DIV AMBAC INTERNATIONAL (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
cross-sectional_height0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
end_item_identificationTRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E; PROPULSION SYSTEMS
NSN5331-00-292-1464
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: GA11014 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONTRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E; PROPULSION SYSTEMS
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 3
04056686011614Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GA 1014Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10914594Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy GA11014?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is GA11014?
GA11014 is a O-RING.
What parts can replace GA11014?
There are 3 known substitutes for GA11014: 04056686011614, GA 1014, 10914594. Substitute compatibility should be verified for your specific system.
What is the NSN for GA11014?
GA11014 is cataloged in the U.S. Government catalog under NSN 5331-00-292-1464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — GA11014