PartsTable
Technical Data Sheet
Download PDF

04056686011614 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

04056686011614: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, center_hole_diameter: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN, cross-sectional_height: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN, end_item_identification: TRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E; PROPULSION SYSTEMS. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-292-1464, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
04056686011614
NSN: 5331-00-292-1464
FSC: 5331 — O-ring
CAGE: D0078 — DIEHL DEFENCE GMBH & CO. KG (DEU)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
center_hole_diameter0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
cross-sectional_height0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
end_item_identificationTRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E; PROPULSION SYSTEMS
NSN5331-00-292-1464
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 04056686011614 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.055 INCHES MINIMUM AND 0.065 INCHES MAXIMUM IN
CENTER HOLE DIAMETER0.370 INCHES MINIMUM AND 0.380 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONTRUCK, CARGO, DROPSIDE 2 1/2-TON 6X6 W/E; PROPULSION SYSTEMS
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
SUBSTITUTES & CROSS-REFERENCES 3
GA 1014Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
10914594Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
GA11014Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 04056686011614?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 04056686011614?
04056686011614 is a O-RING.
What parts can replace 04056686011614?
There are 3 known substitutes for 04056686011614: GA 1014, 10914594, GA11014. Substitute compatibility should be verified for your specific system.
What is the NSN for 04056686011614?
04056686011614 is cataloged in the U.S. Government catalog under NSN 5331-00-292-1464. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 04056686011614