G9-32P3 — GEAR,SPUR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

G9-32P3: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 0.5000 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-727-7524, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

G9-32P3

NSN: 3020-00-727-7524
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 08680 — FEDERAL SKI AND ENGINEERING (USA)

SPECIFICATIONS

material	STEEL COMP 303 OVERALL
body_style	PLAIN, SOLID
bore_style	PLAIN BOTH ENDS
tooth_form	STANDARD
pitch_diameter	0.5000 INCHES NOMINAL IN
pressure_angle	20.0000 DEGREES
teeth_quantity	32
special_features	1 0.086 IN. DIA THREADED HOLE ON HUB FOR POSITIONING IN
style_designator	PROTRUDING HUB
surface_treatment	PASSIVATE OVERALL
face_nominal_width	0.125 INCHES IN
hub_nominal_diameter	0.312 INCHES FIRST END IN
NSN	3020-00-727-7524

COMPONENT DIAGRAM

KEY FEATURES

•

BORE NOMINAL DIAMETER: 0.125 INCHES BOTH ENDS IN

•

HUB NOMINAL DIAMETER: 0.312 INCHES FIRST END IN

•

TEETH QUANTITY: 32

•

BODY STYLE: PLAIN, SOLID

•

BORE STYLE: PLAIN BOTH ENDS

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.187 INCHES FIRST END IN

•

STYLE DESIGNATOR: PROTRUDING HUB

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

BORE NOMINAL DIAMETER	0.125 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER	0.312 INCHES FIRST END IN
TEETH QUANTITY	32
BODY STYLE	PLAIN, SOLID
BORE STYLE	PLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.187 INCHES FIRST END IN
STYLE DESIGNATOR	PROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER	0.5000 INCHES NOMINAL IN
TOOTH FORM	STANDARD

SUBSTITUTES & CROSS-REFERENCES 7

1047256-32Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

D44S32P2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

P64S10-32Q12Reference document

Same NSN cross-reference

Reference document — Secondary reference

B22-32P2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5250-7093-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

G9-32Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy G9-32P3?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is G9-32P3?

G9-32P3 is a GEAR,SPUR.

What parts can replace G9-32P3?

There are 7 known substitutes for G9-32P3: 1047256-32, D44S32P2, P64S10-32Q12 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for G9-32P3?

G9-32P3 is cataloged in the U.S. Government catalog under NSN 3020-00-727-7524. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

G9-32P3 — GEAR,SPUR

Request a Quote — G9-32P3