G9-32 — HARNESS,HEAD,RESPIRATOR

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

G9-32: HARNESS,HEAD,RESPIRATOR.

The HARNESS,HEAD,RESPIRATOR is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, load_type: RESISTIVE SINGLE POWER OUTPUT, body_style: PLAIN, SOLID, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, overall_width: 2.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3020-00-727-7524, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ G9-32

NSN: 3020-00-727-7524
NIINs: 007277524, 010188385, 012056972, 012506401
FSC: 3020 — Gears, Pulleys, Sprockets, and Transmission Chain
CAGE: 00141 — ROLLER BEARING CO OF AMERICA, INC DIV PIC DESIGN (USA)

SPECIFICATIONS

material	STEEL COMP 303 OVERALL
load_type	RESISTIVE SINGLE POWER OUTPUT
body_style	PLAIN, SOLID
bore_style	PLAIN BOTH ENDS
tooth_form	STANDARD
overall_width	2.750 INCHES NOMINAL IN
overall_height	3.130 INCHES NOMINAL IN
overall_length	1.500 INCHES NOMINAL IN
pitch_diameter	0.5000 INCHES NOMINAL IN
pressure_angle	20.0000 DEGREES
teeth_quantity	32
special_features	BASE TEMPERATURE RATING MINUS 50 DEG C TO 100 DEG C,ALTITUDE RATING SEA LEVEL TO INFINITY DEGC
NSN	3020-00-727-7524

COMPONENT DIAGRAM

KEY FEATURES

•

BORE NOMINAL DIAMETER: 0.125 INCHES BOTH ENDS IN

•

HUB NOMINAL DIAMETER: 0.312 INCHES FIRST END IN

•

TEETH QUANTITY: 32

•

BODY STYLE: PLAIN, SOLID

•

BORE STYLE: PLAIN BOTH ENDS

•

NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END: 0.187 INCHES FIRST END IN

•

STYLE DESIGNATOR: PROTRUDING HUB

•

MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL

TECHNICAL CHARACTERISTICS

BORE NOMINAL DIAMETER	0.125 INCHES BOTH ENDS IN
HUB NOMINAL DIAMETER	0.312 INCHES FIRST END IN
TEETH QUANTITY	32
BODY STYLE	PLAIN, SOLID
BORE STYLE	PLAIN BOTH ENDS
NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END	0.187 INCHES FIRST END IN
STYLE DESIGNATOR	PROTRUDING HUB
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-7720,COMP 303S MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
PITCH DIAMETER	0.5000 INCHES NOMINAL IN
TOOTH FORM	STANDARD

SUBSTITUTES & CROSS-REFERENCES 7

1047256-32Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

G9-32P3Reference document

Same NSN cross-reference

Reference document — Secondary reference

D44S32P2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

P64S10-32Q12Reference document

Same NSN cross-reference

Reference document — Secondary reference

B22-32P2Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

5250-7093-3Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy G9-32?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is G9-32?

G9-32 is a HARNESS,HEAD,RESPIRATOR. It is classified as a MRO (MRO_GENERAL).

What parts can replace G9-32?

There are 7 known substitutes for G9-32: 1047256-32, G9-32P3, D44S32P2 and 4 more. Substitute compatibility should be verified for your specific system.

What is the NSN for G9-32?

G9-32 is cataloged in the U.S. Government catalog under NSN 3020-00-727-7524. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

G9-32 — HARNESS,HEAD,RESPIRATOR

Request a Quote — G9-32