PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FPHM903210
FPHM903210 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,STEERING SHAFT is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_diameter: 0.8830 INCHES NOMINAL IN, overall_length: 0.9680 INCHES NOMINAL IN, flange_outside_diameter: 1.4220 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-271-0384, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FPHM903210
NSN: 3110-00-271-0384
FSC: 3110
CAGE: 89346 — NAVISTAR INTL CORP TRUCK BR OHIO PLANT (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_diameter0.8830 INCHES NOMINAL IN
overall_length0.9680 INCHES NOMINAL IN
special_featuresSNAP RING,3 LUGS ON OD OF OUTER RING EQUALLY SPACED,3 PRONGS ON OD OF OUTER RING EQUALLY SPACED BETWEEN LUGS,SPRING AND SPRING SEAT ASSEMBLED W/BRG
flange_outside_diameter1.4220 INCHES NOMINAL IN
NSN3110-00-271-0384
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FPHM903210 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL OVERALL
•
FLANGE OUTSIDE DIAMETER: 1.4220 INCHES NOMINAL IN
•
BORE DIAMETER: 0.8830 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESSNAP RING,3 LUGS ON OD OF OUTER RING EQUALLY SPACED,3 PRONGS ON OD OF OUTER RING EQUALLY SPACED BETWEEN LUGS,SPRING AND SPRING SEAT ASSEMBLED W/BRG
MATERIALSTEEL OVERALL
FLANGE OUTSIDE DIAMETER1.4220 INCHES NOMINAL IN
OVERALL LENGTH0.9680 INCHES NOMINAL IN
BORE DIAMETER0.8830 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
A10690Interchangeable
interchangeable cross-reference
interchangeable
0740623Interchangeable
interchangeable cross-reference
interchangeable
5315000348030Interchangeable
interchangeable cross-reference
interchangeable
610697Interchangeable
interchangeable cross-reference
interchangeable
900553Interchangeable
interchangeable cross-reference
interchangeable
25T819D7Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FPHM903210?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FPHM903210?
FPHM903210 is a BEARING,BALL,STEERING SHAFT.
What parts can replace FPHM903210?
There are 23 known substitutes for FPHM903210: A10690, 0740623, 5315000348030 and 20 more. Substitute compatibility should be verified for your specific system.
Is FPHM903210 still available?
FPHM903210 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FPHM903210

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026