PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5315000348030
5315000348030 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include material: STEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OVERALL, first_end_style: CHAMFERED, surface_treatment: PHOSPHATE OVERALL, pin_overall_length: 0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, pin_overall_diameter: 0.1557 INCHES MINIMUM AND 0.1567 INCHES MAXIMUM IN, first_end_taper_angle: 23.0 DEGREES MINIMUM AND 27.0 DEGREES MAXIMUM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-034-8030, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5315000348030
NSN: 5315-00-034-8030
FSC: 5315
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OVERALL
first_end_styleCHAMFERED
surface_treatmentPHOSPHATE OVERALL
pin_overall_length0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
pin_overall_diameter0.1557 INCHES MINIMUM AND 0.1567 INCHES MAXIMUM IN
first_end_taper_angle23.0 DEGREES MINIMUM AND 27.0 DEGREES MAXIMUM
first_end_taper_length0.0151 INCHES MINIMUM AND 0.0161 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-00779 FED SPEC ALL MATERIAL RESPONSES OVERALL
second_end_relationship_with_first_endIDENTICAL
surface_treatment_document_and_classificationMIL-C-12968 TY A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5315-00-034-8030
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 5315000348030 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-00779 FED SPEC ALL MATERIAL RESPONSES OVERALL
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SURFACE TREATMENT: PHOSPHATE OVERALL
•
FIRST END TAPER ANGLE: 23.0 DEGREES MINIMUM AND 27.0 DEGREES MAXIMUM
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-C-12968 TY A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
PIN OVERALL DIAMETER: 0.1557 INCHES MINIMUM AND 0.1567 INCHES MAXIMUM IN
•
PIN OVERALL LENGTH: 0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-00779 FED SPEC ALL MATERIAL RESPONSES OVERALL
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SURFACE TREATMENTPHOSPHATE OVERALL
FIRST END TAPER ANGLE23.0 DEGREES MINIMUM AND 27.0 DEGREES MAXIMUM
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-C-12968 TY A MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
PIN OVERALL DIAMETER0.1557 INCHES MINIMUM AND 0.1567 INCHES MAXIMUM IN
PIN OVERALL LENGTH0.426 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
MATERIALSTEEL COMP W108 OR STEEL COMP W109 OR STEEL COMP W110 OVERALL
FIRST END TAPER LENGTH0.0151 INCHES MINIMUM AND 0.0161 INCHES MAXIMUM IN
FIRST END STYLECHAMFERED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
063984Interchangeable
interchangeable cross-reference
interchangeable
88771HInterchangeable
interchangeable cross-reference
interchangeable
A10690Interchangeable
interchangeable cross-reference
interchangeable
MIL-DTL-38999Interchangeable
interchangeable cross-reference
interchangeable
MS27468T17B26PBInterchangeable
interchangeable cross-reference
interchangeable
0740623Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5315000348030?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5315000348030?
5315000348030 is a PIN,STRAIGHT,HEADLESS.
What parts can replace 5315000348030?
There are 6 known substitutes for 5315000348030: 063984, 88771H, A10690 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 5315000348030?
5315000348030 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-034-8030. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5315000348030

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026