PartsTable
Technical Data Sheet
Download PDF

FFS92TYPE2STYLE10P — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FFS92TYPE2STYLE10P: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: HEXAGON, head_height: 0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 2A A, hole_diameter: 0.046 INCHES NOMINAL IN, thread_length: 0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-012-5982, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS92TYPE2STYLE10P
NSN: 5305-00-012-5982
NIINs: 000125982, 000187838, 002067670, 002071574, 002269031, 004886532, 008892974, 008892975, 008892976
FSC: 5305 — Screws
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleHEXAGON
head_height0.172 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class2A A
hole_diameter0.046 INCHES NOMINAL IN
hole_quantity1
thread_length0.938 INCHES MINIMUM AND 1.000 INCHES MAXIMUM IN
screw_materialSTEEL CORROSION RESISTING
fastener_length1.438 INCHES MINIMUM AND 1.500 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
features_providedUNFINISHED HEAD
surface_treatmentPASSIVATE OVERALL
NSN5305-00-012-5982
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS92TYPE2STYLE10P · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 5 STEEL FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONGRADE 5 STEEL FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 2
FFS92Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
65414Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FFS92TYPE2STYLE10P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS92TYPE2STYLE10P?
FFS92TYPE2STYLE10P is a SCREW,MACHINE.
What parts can replace FFS92TYPE2STYLE10P?
There are 2 known substitutes for FFS92TYPE2STYLE10P: FFS92, 65414. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS92TYPE2STYLE10P?
FFS92TYPE2STYLE10P is cataloged in the U.S. Government catalog under NSN 5305-00-012-5982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS92TYPE2STYLE10P

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.