PartsTable
Technical Data Sheet
Download PDF

65414 — 65414

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

65414: 65414.

The 65414 is a the manufacturer industrial component. This part is cataloged in the U.S. Government catalog under NSN 5305-00-012-5982, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 65414
NSN: 5305-00-012-5982
NIINs: 000125982, 002818923, 003560920, 016146232
FSC: 5305 — Screws
CAGE: 10237 — CADILLAC GAGE TEXTRON INC. (USA)
SPECIFICATIONS
Part Number65414
NSN5305-00-012-5982
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 65414 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: GRADE 5 STEEL FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.438 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONGRADE 5 STEEL FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 2
FFS92Reference document
Same NSN cross-reference
Reference document — Replaced / superseded reference
FFS92TYPE2STYLE10PReference document
Same NSN cross-reference
Reference document — Identification reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 65414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 65414?
65414 is a 65414. It is classified as a MRO (MRO_GENERAL).
What parts can replace 65414?
There are 2 known substitutes for 65414: FFS92, FFS92TYPE2STYLE10P. Substitute compatibility should be verified for your specific system.
What is the NSN for 65414?
65414 is cataloged in the U.S. Government catalog under NSN 5305-00-012-5982. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 65414

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.