PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFS103BASIC0NLYTYPEIVSTYLE1
FFS103BASIC0NLYTYPEIVSTYLE1 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEADLESS (SETSCREW), point_style: FLAT, spline_width: 0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.375 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-206-5035, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFS103BASIC0NLYTYPEIVSTYLE1
NSN: 5305-00-206-5035
FSC: 5305
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEADLESS (SETSCREW)
point_styleFLAT
spline_width0.023 INCHES MINIMUM AND 0.025 INCHES MAXIMUM IN
thread_class2A A
thread_length0.375 INCHES MAXIMUM IN
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
features_providedCASEHARDENED
surface_treatmentNICKEL OVERALL
internal_drive_styleSIX SPLINE
spline_major_diameter0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
NSN5305-00-206-5035
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FFS103BASIC0NLYTYPEIVSTYLE1 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD DIRECTION: RIGHT-HAND
•
HEAD STYLE: HEADLESS (SETSCREW)
•
POINT STYLE: FLAT
•
MATERIAL: STEEL OVERALL
•
THREAD QUANTITY PER INCH: 32
•
NONDEFINITIVE SPEC/STD DATA: 4 TYPE AND 1 STYLE
•
SPLINE MINOR DIAMETER: 0.096 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD DIRECTIONRIGHT-HAND
HEAD STYLEHEADLESS (SETSCREW)
POINT STYLEFLAT
MATERIALSTEEL OVERALL
THREAD QUANTITY PER INCH32
NONDEFINITIVE SPEC/STD DATA4 TYPE AND 1 STYLE
SPLINE MINOR DIAMETER0.096 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
SPLINE MAJOR DIAMETER0.113 INCHES MINIMUM AND 0.115 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNF
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
17713Interchangeable
interchangeable cross-reference
interchangeable
11-269Interchangeable
interchangeable cross-reference
interchangeable
D-57621Interchangeable
interchangeable cross-reference
interchangeable
11269G1Interchangeable
interchangeable cross-reference
interchangeable
011126901Interchangeable
interchangeable cross-reference
interchangeable
R11269Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFS103BASIC0NLYTYPEIVSTYLE1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFS103BASIC0NLYTYPEIVSTYLE1?
FFS103BASIC0NLYTYPEIVSTYLE1 is a SETSCREW.
What parts can replace FFS103BASIC0NLYTYPEIVSTYLE1?
There are 12 known substitutes for FFS103BASIC0NLYTYPEIVSTYLE1: 17713, 11-269, D-57621 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFS103BASIC0NLYTYPEIVSTYLE1?
FFS103BASIC0NLYTYPEIVSTYLE1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-206-5035. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFS103BASIC0NLYTYPEIVSTYLE1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026