PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFH00111TYPEF1011C
FFH00111TYPEF1011C ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,BARREL is a the manufacturer industrial component. Key specifications include width: 1.000 INCHES NOMINAL PLATE IN, length: 5.000 INCHES NOMINAL PLATE IN, diameter: 0.344 INCHES NOMINAL BAR IN, strike_type: RIM, special_features: WEIGHT:1.250 LBS PER DOZEN;BAR O/A LG:2.000 IN.NOM;MATL:STEEL; LBS, features_provided: SCREW. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2305, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFH00111TYPEF1011C
NSN: 5340-00-240-2305
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
width1.000 INCHES NOMINAL PLATE IN
length5.000 INCHES NOMINAL PLATE IN
diameter0.344 INCHES NOMINAL BAR IN
strike_typeRIM
strike_quantity1
special_featuresWEIGHT:1.250 LBS PER DOZEN;BAR O/A LG:2.000 IN.NOM;MATL:STEEL; LBS
features_providedSCREW
surface_treatmentZINC PLATE
end_item_identificationW/S:STRATEGIC WEAPON SYSTEMS (PSEIDON AND TRIDENT)
nondefinitive_spec/std_dataF1011C TYPE
departure_from_cited_designatorVCBV
NSN5340-00-240-2305
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFH00111TYPEF1011C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
NONDEFINITIVE SPEC/STD DATA: F1011C TYPE
•
SURFACE TREATMENT: ZINC PLATE
•
STRIKE QUANTITY: 1
•
WIDTH: 1.125 INCHES NOMINAL PLATE IN
•
FEATURES PROVIDED: SCREW
•
DIAMETER: 0.313 INCHES NOMINAL BAR IN
•
LENGTH: 3.000 INCHES NOMINAL PLATE IN
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATAF1011C TYPE
SURFACE TREATMENTZINC PLATE
SPECIAL FEATURESWEIGHT:2.625 LBS PER DOZEN;BAR O/A LG:3.000 IN.NOM;MATL:STEEL; LBS
STRIKE QUANTITY1
WIDTH1.125 INCHES NOMINAL PLATE IN
FEATURES PROVIDEDSCREW
DIAMETER0.313 INCHES NOMINAL BAR IN
LENGTH3.000 INCHES NOMINAL PLATE IN
STRIKE TYPERIM
SURFACE TREATMENTZINC BAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
FFH00111TYPEF1011CUpgraded Successor
successor cross-reference
successor
SC1078K-4 IN.Interchangeable
interchangeable cross-reference
interchangeable
SC290-ZN 4INCHInterchangeable
interchangeable cross-reference
interchangeable
FF-H-111Interchangeable
interchangeable cross-reference
interchangeable
SP1078-US2C-2 1/2 INInterchangeable
interchangeable cross-reference
interchangeable
SP1078-6US2CInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFH00111TYPEF1011C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFH00111TYPEF1011C?
FFH00111TYPEF1011C is a BOLT,BARREL.
What parts can replace FFH00111TYPEF1011C?
There are 11 known substitutes for FFH00111TYPEF1011C: FFH00111TYPEF1011C, SC1078K-4 IN., SC290-ZN 4INCH and 8 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFH00111TYPEF1011C?
FFH00111TYPEF1011C is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2305. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFH00111TYPEF1011C

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026