PartsTable
Technical Data Sheet
SP1078-6US2C ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOLT,BARREL is a the manufacturer industrial component. Key specifications include width: 1.313 INCHES NOMINAL PLATE IN, length: 6.000 INCHES NOMINAL PLATE IN, diameter: 0.344 INCHES NOMINAL BAR IN, strike_type: RIM, special_features: WEIGHT:6.378 LBS PER DOZEN;BAR O/A LG:6.000 IN.NOM;MATL:STEEL; LBS, features_provided: SCREW. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-240-2308, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
SP1078-6US2C
NSN: 5340-00-240-2308
FSC: 5340
CAGE: 63204 — STANLEY INDUSTRIAL HARDWARE DIV THE STANLEY WORKS (USA)
SPECIFICATIONS
width1.313 INCHES NOMINAL PLATE IN
length6.000 INCHES NOMINAL PLATE IN
diameter0.344 INCHES NOMINAL BAR IN
strike_typeRIM
strike_quantity1
special_featuresWEIGHT:6.378 LBS PER DOZEN;BAR O/A LG:6.000 IN.NOM;MATL:STEEL; LBS
features_providedSCREW
surface_treatmentZINC PLATE
nondefinitive_spec/std_dataF1011C TYPE
departure_from_cited_designatorVCBV
NSN5340-00-240-2308
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: SP1078-6US2C MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
SURFACE TREATMENT: ZINC PLATE
NONDEFINITIVE SPEC/STD DATA: F1011C TYPE
DEPARTURE FROM CITED DESIGNATOR: VCBV
FEATURES PROVIDED: SCREW
STRIKE TYPE: RIM
WIDTH: 1.313 INCHES NOMINAL PLATE IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENTZINC PLATE
NONDEFINITIVE SPEC/STD DATAF1011C TYPE
SURFACE TREATMENTZINC BAR
DEPARTURE FROM CITED DESIGNATORVCBV
FEATURES PROVIDEDSCREW
SPECIAL FEATURESWEIGHT:6.378 LBS PER DOZEN;BAR O/A LG:6.000 IN.NOM;MATL:STEEL; LBS
STRIKE TYPERIM
WIDTH1.313 INCHES NOMINAL PLATE IN
LENGTH6.000 INCHES NOMINAL PLATE IN
STRIKE QUANTITY1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
N117-986Upgraded Successor
successor cross-reference
successor
FF-H-111Upgraded Successor
successor cross-reference
successor
A-A-462Upgraded Successor
successor cross-reference
successor
320432Upgraded Successor
successor cross-reference
successor
320441Upgraded Successor
successor cross-reference
successor
BHMA-A156.20 A83162 3-1/4INUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy SP1078-6US2C?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is SP1078-6US2C?
SP1078-6US2C is a BOLT,BARREL.
What parts can replace SP1078-6US2C?
There are 13 known substitutes for SP1078-6US2C: N117-986, FF-H-111, A-A-462 and 10 more. Substitute compatibility should be verified for your specific system.
Is SP1078-6US2C still available?
SP1078-6US2C is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — SP1078-6US2C