PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-W-92 TY A GR 1 CL A
FF-W-92 TY A GR 1 CL A ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1015 OR STEEL COMP 1030 OVERALL, thickness: 0.083 INCHES NOMINAL IN, hole_diameter: 0.234 INCHES NOMINAL IN, heat_treatment: T-86 SOLUTION HEAT TREATED, COLD WORKED BY REDUCTION OF 6 PERCENT, ARTIFICALLY AGED, overall_diameter: 1.125 INCHES NOMINAL IN, special_features: PACKAGED IN 5 LB BOX LBS. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-044-6284, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-W-92 TY A GR 1 CL A
NSN: 5310-00-044-6284
FSC: 5310
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL COMP 1015 OR STEEL COMP 1030 OVERALL
thickness0.083 INCHES NOMINAL IN
hole_diameter0.234 INCHES NOMINAL IN
heat_treatmentT-86 SOLUTION HEAT TREATED, COLD WORKED BY REDUCTION OF 6 PERCENT, ARTIFICALLY AGED
overall_diameter1.125 INCHES NOMINAL IN
special_featuresPACKAGED IN 5 LB BOX LBS
surface_treatmentCADMIUM AND CHROMATE OVERALL
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationA4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
cross-sectional_shape_styleRECTANGULAR
nondefinitive_spec/std_dataA TYPE AND 1 GRADE AND A CLASS
NSN5310-00-044-6284
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: FF-W-92 TY A GR 1 CL A · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE SHAPE STYLE: ROUND
•
NONDEFINITIVE SPEC/STD DATA: A TYPE
•
DEPARTURE FROM CITED DOCUMENT: AS MODIFIED BY SURFACE TREATMENT
•
HOLE DIAMETER: 1.188 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OR ZINC OVERALL
•
MATERIAL: STEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
•
OVERALL DIAMETER: 2.500 INCHES NOMINAL IN
•
PERIPHERAL SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE SHAPE STYLEROUND
NONDEFINITIVE SPEC/STD DATAA TYPE
DEPARTURE FROM CITED DOCUMENTAS MODIFIED BY SURFACE TREATMENT
HOLE DIAMETER1.188 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM OR ZINC OVERALL
MATERIALSTEEL COMP 1010 OR STEEL COMP 1015 OR STEEL COMP 1016 OR STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 1020 OVERALL
OVERALL DIAMETER2.500 INCHES NOMINAL IN
PERIPHERAL SHAPE STYLEROUND
THICKNESS0.136 INCHES MINIMUM AND 0.192 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
FF-W-92 TY A GR 1 CL AInterchangeable
interchangeable cross-reference
interchangeable
9090763-9Interchangeable
interchangeable cross-reference
interchangeable
28912Interchangeable
interchangeable cross-reference
interchangeable
ANSI-B18.22.1 TYAInterchangeable
interchangeable cross-reference
interchangeable
FF-W-92Interchangeable
interchangeable cross-reference
interchangeable
B18.22.1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-W-92 TY A GR 1 CL A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-W-92 TY A GR 1 CL A?
FF-W-92 TY A GR 1 CL A is a WASHER,FLAT.
What parts can replace FF-W-92 TY A GR 1 CL A?
There are 8 known substitutes for FF-W-92 TY A GR 1 CL A: FF-W-92 TY A GR 1 CL A, 9090763-9, 28912 and 5 more. Substitute compatibility should be verified for your specific system.
Is FF-W-92 TY A GR 1 CL A still available?
FF-W-92 TY A GR 1 CL A is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-W-92 TY A GR 1 CL A

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026