PartsTable
Technical Data Sheet
Download PDF

FF-S-92 TY1ST9S — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

FF-S-92 TY1ST9S: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: PAN NO. 2, head_height: 0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN, thread_length: 0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN, fastener_length: 0.375 INCHES NOMINAL IN.

This part is cataloged in the U.S. Government catalog under NSN 5305-00-984-6208, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-S-92 TY1ST9S
NSN: 5305-00-984-6208
NIINs: 009846208, 010282454, 013465335
FSC: 5305 — Screws
CAGE: 80244 — GENERAL SERVICES ADMINISTRATION FEDERAL SUPPLY SERVICE (USA)
SPECIFICATIONS
head_stylePAN NO. 2
head_height0.058 INCHES MINIMUM AND 0.068 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.205 INCHES MINIMUM AND 0.219 INCHES MAXIMUM IN
thread_length0.325 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
fastener_length0.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
internal_drive_styleSLOT
end_item_identificationMRAP-COUGAR
nominal_thread_diameter0.112 INCHES IN
screw_surface_treatmentPASSIVATE
minimum_tensile_strength80000 POUNDS PER SQUARE INCH LBS
NSN5305-00-984-6208
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: FF-S-92 TY1ST9S · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
•
SCREW SURFACE TREATMENT: CADMIUM OR ZINC
•
FASTENER LENGTH: 0.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.292 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: PAN
•
THREAD DIRECTION: RIGHT-HAND
•
NONDEFINITIVE SPEC/STD DATA: 1 TYPE
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM IN
SCREW SURFACE TREATMENTCADMIUM OR ZINC
FASTENER LENGTH0.375 INCHES NOMINAL IN
THREAD LENGTH0.292 INCHES MINIMUM AND 0.375 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEPAN
THREAD DIRECTIONRIGHT-HAND
NONDEFINITIVE SPEC/STD DATA1 TYPE
SCREW MATERIALSTEEL COMP 1010 OR STEEL COMP 1011 OR STEEL COMP 1013
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 9
A50145-030Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS35206-261-3/8IN.X3/32IN.-24Reference document
Same NSN cross-reference
Reference document — Secondary reference
AN515-10-6Reference document
Same NSN cross-reference
Reference document — Secondary reference
5305009846208Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-92Reference document
Same NSN cross-reference
Reference document — Secondary reference
10393654Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy FF-S-92 TY1ST9S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-S-92 TY1ST9S?
FF-S-92 TY1ST9S is a SCREW,MACHINE.
What parts can replace FF-S-92 TY1ST9S?
There are 9 known substitutes for FF-S-92 TY1ST9S: A50145-030, MS35206-261-3/8IN.X3/32IN.-24, AN515-10-6 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-S-92 TY1ST9S?
FF-S-92 TY1ST9S is cataloged in the U.S. Government catalog under NSN 5305-00-984-6208. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-S-92 TY1ST9S

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.