PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FF-B-2844/02AN1CX

FF-B-2844/02AN1CX — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 0.5000 INCHES NOMINAL IN, overall_width: 0.3125 INCHES NOMINAL IN, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-882-3635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FF-B-2844/02AN1CX
NSN: 3110-00-882-3635
FSC: 3110
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter0.5000 INCHES NOMINAL IN
overall_width0.3125 INCHES NOMINAL IN
load_directionRADIAL
surface_finishGROUND
shield_quantity2
special_featuresPACK WITH 50 PERCENT OF SPECIFIED GREASE
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
internal_clearance0.0005 INCHES MINIMUM RADIAL AND 0.0008 INCHES MAXIMUM RADIAL IN
lubrication_materialGREASE
overall_outside_diameter1.1250 INCHES NOMINAL IN
NSN3110-00-882-3635
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: FF-B-2844/02AN1CX · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 1.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
SURFACE FINISH: GROUND
•
LOAD DIRECTION: RADIAL
•
LUBRICATION MATERIAL: GREASE
•
SHIELD QUANTITY: 2
•
RETAINER FABRICATION METHOD: PRESSED
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS
OVERALL OUTSIDE DIAMETER1.1250 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONABEC NO.1
SURFACE FINISHGROUND
LOAD DIRECTIONRADIAL
LUBRICATION MATERIALGREASE
SHIELD QUANTITY2
RETAINER FABRICATION METHODPRESSED
INTERNAL FIT-UP DESIGNATIONSTANDARD
LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
FF-B-2844InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
5189342InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
1-210761-3InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
30111InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
W5939092PC24InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FF-B-2844/02AN1CX?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FF-B-2844/02AN1CX?
FF-B-2844/02AN1CX is a BEARING,BALL,ANNULAR.
What parts can replace FF-B-2844/02AN1CX?
There are 34 known substitutes for FF-B-2844/02AN1CX: FF-B-2844, 3TAR17-24U, 5189342 and 31 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FF-B-2844/02AN1CX?
FF-B-2844/02AN1CX is cataloged in the Federal Logistics Information System under NSN 3110-00-882-3635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FF-B-2844/02AN1CX

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026