PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F1407-50
F1407-50 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,DOUBLE ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, first_leg_angle: 45.0 DEGREES NOMINAL, first_leg_style: SQUARE, first_leg_width: 1.500 INCHES NOMINAL IN, first_leg_length: 1.500 INCHES NOMINAL IN, second_leg_angle: 45.0 DEGREES NOMINAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-738-1318, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F1407-50
NSN: 5340-00-738-1318
FSC: 5340
CAGE: 12472 — LOCKWOOD CORP (USA)
SPECIFICATIONS
materialSTEEL
first_leg_angle45.0 DEGREES NOMINAL
first_leg_styleSQUARE
first_leg_width1.500 INCHES NOMINAL IN
first_leg_length1.500 INCHES NOMINAL IN
second_leg_angle45.0 DEGREES NOMINAL
style_designatorDOUBLE ANGLE
second_leg_length1.500 INCHES NOMINAL IN
first_leg_thickness0.375 INCHES NOMINAL IN
center_section_width1.500 INCHES NOMINAL IN
second_leg_thickness0.375 INCHES NOMINAL IN
center_section_height27.750 INCHES NOMINAL IN
NSN5340-00-738-1318
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F1407-50 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG THICKNESS: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DOUBLE ANGLE
•
FIRST LEG ANGLE: 45.0 DEGREES NOMINAL
•
SECOND LEG ANGLE: 45.0 DEGREES NOMINAL
•
CENTER SECTION WIDTH: 1.500 INCHES NOMINAL IN
•
SECOND LEG THICKNESS: 0.375 INCHES NOMINAL IN
•
CENTER SECTION HEIGHT: 27.750 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG THICKNESS0.375 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE ANGLE
FIRST LEG ANGLE45.0 DEGREES NOMINAL
SECOND LEG ANGLE45.0 DEGREES NOMINAL
CENTER SECTION WIDTH1.500 INCHES NOMINAL IN
SECOND LEG THICKNESS0.375 INCHES NOMINAL IN
CENTER SECTION HEIGHT27.750 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.406 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.750 INCHES NOMINAL IN
FIRST LEG STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
29823Interchangeable
interchangeable cross-reference
interchangeable
F96T12/30U/EWInterchangeable
interchangeable cross-reference
interchangeable
F96T12/D830/SSInterchangeable
interchangeable cross-reference
interchangeable
14629Interchangeable
interchangeable cross-reference
interchangeable
8902-14-4Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F1407-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F1407-50?
F1407-50 is a BRACKET,DOUBLE ANGLE.
What parts can replace F1407-50?
There are 5 known substitutes for F1407-50: 29823, F96T12/30U/EW, F96T12/D830/SS and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F1407-50?
F1407-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-738-1318. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F1407-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026