PartsTable
Technical Data Sheet

14629 — Technical Data Sheet

✓ Verified by PartsTable
schleich · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

Living in groups, young deer are cared for and well-protected, especially since they camouflage well in the woods with white spots on their back. Since they must run quickly to escape predators, deer are equipped with long legs. Deer are the only mammals to grow antlers.

Males use their antlers to compete with other males during breeding season. Also, during this time, red deer males grow a mane around their neck. This mane is made up of thick fur and makes the red buck look more intimidating.

These deer can live between ten and twenty years, depending on whether they live in captivity or in the wild. - Fun Fact : Red deer antlers grow one inch per day. - Scientific Name : Cervus elaphus - Conservation Status : Least concern (LC) - Primary Habitat : Forest - Global Home : Europe This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-738-1318, indicating validated use in U.S.

government and defense logistics supply chains.

WHERE IT FITS
14629
NSN: 5340-00-738-1318
FSC: 5340
CAGE: 12472 — LOCKWOOD CORP (USA)
SPECIFICATIONS
part_name_assigned_by_controlling_agencyFIRING PIN SPRING
NSN5340-00-738-1318
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 14629 MFR: schleich ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FIRST LEG THICKNESS: 0.375 INCHES NOMINAL IN
•
STYLE DESIGNATOR: DOUBLE ANGLE
•
FIRST LEG ANGLE: 45.0 DEGREES NOMINAL
•
SECOND LEG ANGLE: 45.0 DEGREES NOMINAL
•
CENTER SECTION WIDTH: 1.500 INCHES NOMINAL IN
•
SECOND LEG THICKNESS: 0.375 INCHES NOMINAL IN
•
CENTER SECTION HEIGHT: 27.750 INCHES NOMINAL IN
•
FIRST LEG HOLE DIAMETER: 0.406 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
FIRST LEG THICKNESS0.375 INCHES NOMINAL IN
STYLE DESIGNATORDOUBLE ANGLE
FIRST LEG ANGLE45.0 DEGREES NOMINAL
SECOND LEG ANGLE45.0 DEGREES NOMINAL
CENTER SECTION WIDTH1.500 INCHES NOMINAL IN
SECOND LEG THICKNESS0.375 INCHES NOMINAL IN
CENTER SECTION HEIGHT27.750 INCHES NOMINAL IN
FIRST LEG HOLE DIAMETER0.406 INCHES NOMINAL IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.750 INCHES NOMINAL IN
FIRST LEG STYLESQUARE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 5
29823Interchangeable
interchangeable cross-reference
interchangeable
F96T12/30U/EWInterchangeable
interchangeable cross-reference
interchangeable
F96T12/D830/SSInterchangeable
interchangeable cross-reference
interchangeable
8902-14-4Interchangeable
Same NIIN cross-reference
interchangeable
F1407-50Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusMATURE
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 14629?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 14629?
14629 is a SPRING,HELICAL,COMPRESSION manufactured by schleich.
What parts can replace 14629?
There are 5 known substitutes for 14629: 29823, F96T12/30U/EW, F96T12/D830/SS and 2 more. Substitute compatibility should be verified for your specific system.
Is 14629 still available?
14629 is currently MATURE.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 14629