PartsTable
Technical Data Sheet
PartsTable / MRO / F1356
F1356 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include material: STEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, body_length: 0.568 INCHES NOMINAL IN, body_material: METAL, hole_diameter: 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN, inclosure_type: HERMETICALLY SEALED. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0814, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ F1356
NSN: 5310-00-167-0814
FSC: 5310
CAGE: 4WWH5 — SOUTHCO, INC. DBA SOUTHCO COUNTERBALANCE DIVISION - PA DIV SOUTHCO COUNTERBALANCE DIVISION - PA (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
body_length0.568 INCHES NOMINAL IN
body_materialMETAL
hole_diameter0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
inclosure_typeHERMETICALLY SEALED
overall_length1.078 INCHES NOMINAL IN
overall_diameter0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
style_designatorROUND TERMINAL/TERMINALS ON OPPOSITE SURFACES
maximum_temp_rise25.0 CELSIUS DEGC
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.250 INCHES IN
NSN5310-00-167-0814
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: F1356 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 GRADE AND B CLASS
•
MATERIAL: STEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
SURFACE TREATMENTPASSIVATE OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND B CLASS
MATERIALSTEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
930409Interchangeable
interchangeable cross-reference
interchangeable
F1356Interchangeable
interchangeable cross-reference
interchangeable
D272Interchangeable
interchangeable cross-reference
interchangeable
B22-48169Interchangeable
interchangeable cross-reference
interchangeable
4CB2Interchangeable
interchangeable cross-reference
interchangeable
169HD-4-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F1356?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F1356?
F1356 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace F1356?
There are 17 known substitutes for F1356: 930409, F1356, D272 and 14 more. Substitute compatibility should be verified for your specific system.
Is F1356 still available?
F1356 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F1356

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026