PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 911294
911294 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The BRUSH SET,ELECTRICAL CONTACT is a the manufacturer industrial component. Key specifications include material: COPPER ALLOY OVERALL, thickness: 0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN, flow_angle: 90.0 DEGREES, leg_length: 0.750 INCHES NOMINAL SECOND END IN, thread_class: 2B FIRST END, hole_diameter: 0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-167-0814, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
911294
NSN: 5310-00-167-0814
FSC: 5310
CAGE: 06848 — HONEYWELL INTERNATIONAL INC DIV AEROSPACE-SOUTH BEND (BENDIX DR) (USA)
SPECIFICATIONS
materialCOPPER ALLOY OVERALL
thickness0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
flow_angle90.0 DEGREES
leg_length0.750 INCHES NOMINAL SECOND END IN
thread_class2B FIRST END
hole_diameter0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
connection_typeTHREADED INTERNAL TUBE FIRST END
connection_stylePLAIN (TUBE) FIRST END
overall_diameter0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
surface_treatmentPASSIVATE OVERALL
operating_pressure5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
nominal_thread_size0.437 INCHES FIRST END IN
NSN5310-00-167-0814
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 911294 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
NONDEFINITIVE SPEC/STD DATA: A TYPE AND 2 GRADE AND B CLASS
•
MATERIAL: STEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
•
PERIPHERAL SHAPE STYLE: ROUND
•
CENTER HOLE SHAPE STYLE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL DIAMETER0.557 INCHES MINIMUM AND 0.582 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC 1ST MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 3RD MATERIAL RESPONSE AND MIL-S-6721 MIL SPEC 4TH MATERIAL RESPONSE OVERALL
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); ARMORED MULTI-PURPOSE VEHICLE (AMPV)
SURFACE TREATMENTPASSIVATE OVERALL
NONDEFINITIVE SPEC/STD DATAA TYPE AND 2 GRADE AND B CLASS
MATERIALSTEEL CORROSION RESISTING OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OVERALL
PERIPHERAL SHAPE STYLEROUND
CENTER HOLE SHAPE STYLEROUND
THICKNESS0.022 INCHES MINIMUM AND 0.042 INCHES MAXIMUM IN
HOLE DIAMETER0.318 INCHES MINIMUM AND 0.338 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 17
930409Interchangeable
interchangeable cross-reference
interchangeable
F1356Interchangeable
interchangeable cross-reference
interchangeable
D272Interchangeable
interchangeable cross-reference
interchangeable
B22-48169Interchangeable
interchangeable cross-reference
interchangeable
4CB2Interchangeable
interchangeable cross-reference
interchangeable
169HD-4-2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 911294?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 911294?
911294 is a BRUSH SET,ELECTRICAL CONTACT.
What parts can replace 911294?
There are 17 known substitutes for 911294: 930409, F1356, D272 and 14 more. Substitute compatibility should be verified for your specific system.
Is 911294 still available?
911294 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 911294

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026