PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F133-1
F133-1 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BOOT,VEHICULAR COMPONENTS is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, overall_height: 2.750 INCHES NOMINAL IN, overall_length: 0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN, inside_diameter: 0.812 INCHES NOMINAL IN, outside_diameter: 2.375 INCHES NOMINAL IN, special_features: BOOT VEHICULAR COMPONENTS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2597, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F133-1
NSN: 3110-00-227-2597
FSC: 3110
CAGE: 72314 — BAE SYSTEMS INFORMATION AND ELECTRONIC SYSTEMS INTEGRATION INC. (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
overall_height2.750 INCHES NOMINAL IN
overall_length0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
inside_diameter0.812 INCHES NOMINAL IN
outside_diameter2.375 INCHES NOMINAL IN
special_featuresBOOT VEHICULAR COMPONENTS
working_bore_diameter0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
vehicle_design_control_activity63477
NSN3110-00-227-2597
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: F133-1 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL SLEEVE
•
OUTSIDE DIAMETER: 0.4996 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
WORKING BORE DIAMETER: 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL SLEEVE
MATERIALSTEEL BALL
OUTSIDE DIAMETER0.4996 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OVERALL LENGTH0.7400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM IN
WORKING BORE DIAMETER0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 29
A2104Interchangeable
interchangeable cross-reference
interchangeable
MS17162Interchangeable
interchangeable cross-reference
interchangeable
B4Interchangeable
interchangeable cross-reference
interchangeable
L-4-2554Interchangeable
interchangeable cross-reference
interchangeable
SL6572-77Interchangeable
interchangeable cross-reference
interchangeable
NC3110-344Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy F133-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F133-1?
F133-1 is a BOOT,VEHICULAR COMPONENTS.
What parts can replace F133-1?
There are 29 known substitutes for F133-1: A2104, MS17162, B4 and 26 more. Substitute compatibility should be verified for your specific system.
What is the NSN for F133-1?
F133-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-227-2597. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F133-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026