PartsTable
Technical Data Sheet
PartsTable / COMPONENT / MS17162
MS17162 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include material: STEEL COMP E51100 OR STEEL COMP E52100 OVERALL, alignment_type: RIGID, overall_height: 0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN, surface_finish: GROUND, style_designator: FLAT RACE SURFACE, STAGGERED BALL RETAINER, bore_smallest_diameter: 0.6915 INCHES MINIMUM AND 0.6935 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9145, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MS17162
NSN: 3110-00-155-9145
FSC: 3110
CAGE: 96906 — MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
materialSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
alignment_typeRIGID
overall_height0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
surface_finishGROUND
style_designatorFLAT RACE SURFACE, STAGGERED BALL RETAINER
bore_smallest_diameter0.6915 INCHES MINIMUM AND 0.6935 INCHES MAXIMUM IN
overall_outside_diameter1.3436 INCHES MINIMUM AND 1.3438 INCHES MAXIMUM IN
material_document_and_classification66 FED STD ALL MATERIAL RESPONSES OVERALL
thrust_directional_capability_designationSINGLE
NSN3110-00-155-9145
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: MS17162 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: FLAT RACE SURFACE, STAGGERED BALL RETAINER
•
OVERALL OUTSIDE DIAMETER: 1.3436 INCHES MINIMUM AND 1.3438 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
BORE SMALLEST DIAMETER: 0.6915 INCHES MINIMUM AND 0.6935 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORFLAT RACE SURFACE, STAGGERED BALL RETAINER
OVERALL OUTSIDE DIAMETER1.3436 INCHES MINIMUM AND 1.3438 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
BORE SMALLEST DIAMETER0.6915 INCHES MINIMUM AND 0.6935 INCHES MAXIMUM IN
OVERALL HEIGHT0.5575 INCHES MINIMUM AND 0.5675 INCHES MAXIMUM IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 28
5616Interchangeable
interchangeable cross-reference
interchangeable
5-686Interchangeable
interchangeable cross-reference
interchangeable
SIJ2-2472Interchangeable
interchangeable cross-reference
interchangeable
A2104Interchangeable
interchangeable cross-reference
interchangeable
HP8491B-OPT030Interchangeable
interchangeable cross-reference
interchangeable
18N-30Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy MS17162?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MS17162?
MS17162 is a BEARING,BALL,THRUST.
What parts can replace MS17162?
There are 28 known substitutes for MS17162: 5616, 5-686, SIJ2-2472 and 25 more. Substitute compatibility should be verified for your specific system.
What is the NSN for MS17162?
MS17162 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-9145. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — MS17162

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026