PartsTable
Technical Data Sheet
Download PDF

F1075 — FILTER,BAND PASS

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

F1075: FILTER,BAND PASS.

The FILTER,BAND PASS is a the manufacturer industrial component. Key specifications include shape: RECTANGULAR, material: PLASTIC ACRYLIC LENS, body_width: 1.375 INCHES NOMINAL IN, lens_color: WHITE, TRANSLUCENT, body_height: 4.375 INCHES NOMINAL IN, body_length: 1.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-599-4923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ F1075
NSN: 5330-00-599-4923
NIINs: 005994923, 009318492, 013898918, 014305346
FSC: 5330 — Packing and Gasket Materials
CAGE: 15472 — SOLVENTUM PURIFICATION INC. DIV FILTRATION AND SEPARATION DIVISION (USA)
SPECIFICATIONS
shapeRECTANGULAR
materialPLASTIC ACRYLIC LENS
body_width1.375 INCHES NOMINAL IN
lens_colorWHITE, TRANSLUCENT
body_height4.375 INCHES NOMINAL IN
body_length1.750 INCHES NOMINAL IN
overall_width9.062 INCHES NOMINAL IN
inclosure_typeHERMETICALLY SEALED
overall_height4.188 INCHES NOMINAL IN
overall_length29.094 INCHES NOMINAL IN
mounting_methodSCREW
outside_diameter0.875 INCHES NOMINAL IN
NSN5330-00-599-4923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F1075 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-1148 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-F-1148 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.875 INCHES NOMINAL IN
APERTURE DIAMETER0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
MATERIALPAPER OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
BK406Reference document
Same NSN cross-reference
Reference document — Secondary reference
300-D-152Reference document
Same NSN cross-reference
Reference document — Secondary reference
CUF1075Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy F1075?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F1075?
F1075 is a FILTER,BAND PASS. It is classified as a MRO (MRO_GENERAL).
What parts can replace F1075?
There are 3 known substitutes for F1075: BK406, 300-D-152, CUF1075. Substitute compatibility should be verified for your specific system.
What is the NSN for F1075?
F1075 is cataloged in the U.S. Government catalog under NSN 5330-00-599-4923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F1075