PartsTable
Technical Data Sheet
Download PDF

300-D-152 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

300-D-152: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: PAPER OVERALL, outside_diameter: 0.875 INCHES NOMINAL IN, style_designator: CIRCULAR, aperture_diameter: 0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, cross-sectional_thickness: 0.062 INCHES NOMINAL IN, cross-sectional_shape_style: SOLID SINGLE OR COMPOSITION. This part is cataloged in the U.S.

Government catalog under NSN 5330-00-599-4923, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
300-D-152
NSN: 5330-00-599-4923
FSC: 5330 — Packing and Gasket Materials
CAGE: 1GT86 — THERMAL ENGINEERING INTERNATIONAL USA INC (USA)
SPECIFICATIONS
materialPAPER OVERALL
outside_diameter0.875 INCHES NOMINAL IN
style_designatorCIRCULAR
aperture_diameter0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
cross-sectional_thickness0.062 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-F-1148 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-00-599-4923
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 300-D-152 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-F-1148 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
OUTSIDE DIAMETER: 0.875 INCHES NOMINAL IN
•
APERTURE DIAMETER: 0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
•
MATERIAL: PAPER OVERALL
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
STYLE DESIGNATORCIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-F-1148 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OUTSIDE DIAMETER0.875 INCHES NOMINAL IN
APERTURE DIAMETER0.630 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
MATERIALPAPER OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
BK406Reference document
Same NSN cross-reference
Reference document — Secondary reference
CUF1075Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 300-D-152?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 300-D-152?
300-D-152 is a GASKET.
What parts can replace 300-D-152?
There are 2 known substitutes for 300-D-152: BK406, CUF1075. Substitute compatibility should be verified for your specific system.
What is the NSN for 300-D-152?
300-D-152 is cataloged in the U.S. Government catalog under NSN 5330-00-599-4923. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 300-D-152