PartsTable
Technical Data Sheet
PartsTable / COMPONENT / F10 ELA 605
F10 ELA 605 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOCK SET,MORTISE is a the manufacturer industrial component. Key specifications include shape: ROUND CASE, width: 0.875 INCHES NOMINAL IN, length: 2.000 INCHES NOMINAL IN, material: COPPER ALLOY AND STEEL CASE, bolt_type: REGULAR BEVEL, thickness: 1.375 INCHES NOMINAL OVERALL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-664-7026, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
F10 ELA 605
NSN: 5340-00-664-7026
FSC: 5340
CAGE: 43C66 — SCHLAGE LOCK CO (USA)
SPECIFICATIONS
shapeROUND CASE
width0.875 INCHES NOMINAL IN
length2.000 INCHES NOMINAL IN
materialCOPPER ALLOY AND STEEL CASE
bolt_typeREGULAR BEVEL
thickness1.375 INCHES NOMINAL OVERALL IN
face_shapeFLAT
knob_shapeROUND
design_typeLATCH BOLT
knob_quantity2
operation_methodKNOB ON OUTSIDE AND INSIDE TURN KNOB LATCH BOLT
special_featuresSURFACE TREATMENT - BRASS,BRIGHT
NSN5340-00-664-7026
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: F10 ELA 605 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: COPPER ALLOY KNOB
•
FACE SHAPE: FLAT
•
BOLT TYPE: REGULAR BEVEL
•
LENGTH: 2.000 INCHES NOMINAL IN
•
KNOB QUANTITY: 2
•
DEPARTURE FROM CITED DESIGNATOR: LOCKSET F75
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALCOPPER ALLOY KNOB
FACE SHAPEFLAT
SPECIAL FEATURESSURFACE TREATMENT - BRASS,BRIGHT
BOLT TYPEREGULAR BEVEL
LENGTH2.000 INCHES NOMINAL IN
KNOB QUANTITY2
MATERIALCOPPER ALLOY AND STEEL CASE
DEPARTURE FROM CITED DESIGNATORLOCKSET F75
FEATURES PROVIDEDHANDLE
DESIGN TYPELATCH BOLT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 20
FFH106-160E-4Upgraded Successor
successor cross-reference
successor
FF-H-106Upgraded Successor
successor cross-reference
successor
A55PDPLY28Upgraded Successor
successor cross-reference
successor
B260PUpgraded Successor
successor cross-reference
successor
BR260Upgraded Successor
successor cross-reference
successor
FFH106-161PUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy F10 ELA 605?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is F10 ELA 605?
F10 ELA 605 is a LOCK SET,MORTISE.
What parts can replace F10 ELA 605?
There are 20 known substitutes for F10 ELA 605: FFH106-160E-4, FF-H-106, A55PDPLY28 and 17 more. Substitute compatibility should be verified for your specific system.
Is F10 ELA 605 still available?
F10 ELA 605 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — F10 ELA 605

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026