PartsTable
Technical Data Sheet
PartsTable / COMPONENT / FFH106-161P
FFH106-161P ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LOCK SET,MORTISE is a the manufacturer industrial component. Key specifications include shape: ROUND CASE, width: 1.000 INCHES NOMINAL IN, length: 2.250 INCHES NOMINAL IN, material: STEEL CASE, bolt_type: REGULAR BEVEL OR UNIVERSAL, thickness: 2.375 INCHES NOMINAL CASE IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-725-3581, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
FFH106-161P
NSN: 5340-00-725-3581
FSC: 5340
CAGE: 81348 — FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC (USA)
SPECIFICATIONS
shapeROUND CASE
width1.000 INCHES NOMINAL IN
length2.250 INCHES NOMINAL IN
materialSTEEL CASE
bolt_typeREGULAR BEVEL OR UNIVERSAL
thickness2.375 INCHES NOMINAL CASE IN
face_shapeFLAT
knob_shapeROUND
design_typeLATCH BOLT
knob_quantity2
operation_methodOUTSIDE TURN KNOB AND INSIDE TURN KNOB LATCH BOLT
special_featuresCASE DIA:1.688 IN.;CASE LENGTH:1.750 IN.LG IN
NSN5340-00-725-3581
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: FFH106-161P MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH: 1.000 INCHES NOMINAL IN
•
OPERATION METHOD: OUTSIDE TURN KNOB AND INSIDE TURN KNOB LATCH BOLT
•
THICKNESS: 2.375 INCHES NOMINAL CASE IN
•
SHAPE: ROUND CASE
•
LENGTH: 2.250 INCHES NOMINAL IN
•
MATERIAL: STEEL CASE
•
SURFACE TREATMENT: ZINC CASE
TECHNICAL CHARACTERISTICS (FLIS)
WIDTH1.000 INCHES NOMINAL IN
OPERATION METHODOUTSIDE TURN KNOB AND INSIDE TURN KNOB LATCH BOLT
THICKNESS2.375 INCHES NOMINAL CASE IN
THICKNESS1.375 INCHES NOMINAL OVERALL IN
SHAPEROUND CASE
LENGTH2.250 INCHES NOMINAL IN
MATERIALSTEEL CASE
SURFACE TREATMENTZINC CASE
NONDEFINITIVE SPEC/STD DATA161P TYPE
DESIGN TYPELATCH BOLT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
F51 ELA 505Upgraded Successor
successor cross-reference
successor
A156.2Upgraded Successor
successor cross-reference
successor
FF-H-106Upgraded Successor
successor cross-reference
successor
ANSI/BHMA A156.2Upgraded Successor
successor cross-reference
successor
BHMA-A156.2Upgraded Successor
successor cross-reference
successor
D51PD26DUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy FFH106-161P?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is FFH106-161P?
FFH106-161P is a LOCK SET,MORTISE.
What parts can replace FFH106-161P?
There are 22 known substitutes for FFH106-161P: F51 ELA 505, A156.2, FF-H-106 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for FFH106-161P?
FFH106-161P is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-725-3581. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — FFH106-161P

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026