PartsTable
Technical Data Sheet
PartsTable / MRO / EE8
EE8 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,NON. Key specifications include material: LEATHER CASE, style_designator: DIAL OPERATED, features_provided: PRESS TO TALK, incoming_call_signal_device: RINGER, outgoing_call_signal_device: MAGNETO, transmitter_current_supply_source: LOCAL BATTERY OR COMMON BATTERY. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-554-5715, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ EE8
NSN: 3110-00-554-5715
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialLEATHER CASE
style_designatorDIAL OPERATED
features_providedPRESS TO TALK
incoming_call_signal_deviceRINGER
outgoing_call_signal_deviceMAGNETO
transmitter_current_supply_sourceLOCAL BATTERY OR COMMON BATTERY
NSN3110-00-554-5715
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: EE8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STANDARD TOLERANCE DESIGNATION: ABEC NO.1
•
LOAD DIRECTION: RADIAL
•
RETAINER FABRICATION METHOD: PRESSED
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
INTERNAL FIT-UP DESIGNATION: STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
OVERALL WIDTH0.3750 INCHES NOMINAL IN
LOAD DIRECTIONRADIAL
RETAINER FABRICATION METHODPRESSED
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
BORE DIAMETER0.8750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 31
FF-B-2844Interchangeable
interchangeable cross-reference
interchangeable
3TAR17-24UInterchangeable
interchangeable cross-reference
interchangeable
5189342Interchangeable
interchangeable cross-reference
interchangeable
S414Interchangeable
interchangeable cross-reference
interchangeable
7029400Interchangeable
interchangeable cross-reference
interchangeable
R14-3Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy EE8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is EE8?
EE8 is a RESISTOR,VARIABLE,WIRE WOUND,NON. It is classified as a MRO (MRO_GENERAL).
What parts can replace EE8?
There are 31 known substitutes for EE8: FF-B-2844, 3TAR17-24U, 5189342 and 28 more. Substitute compatibility should be verified for your specific system.
Is EE8 still available?
EE8 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — EE8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026