PartsTable
Technical Data Sheet
PartsTable / COMPONENT / E1046-29-1
E1046-29-1 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: STEEL, heat_treatment: ANNEALED, first_leg_angle: 148.0 DEGREES NOMINAL, first_leg_style: END RADIUS, first_leg_width: 0.7500 INCHES NOMINAL IN, first_leg_length: 0.8750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-213-2150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
E1046-29-1
NSN: 5340-00-213-2150
FSC: 5340
CAGE: 08484 — BREEZE-EASTERN LLC (USA)
SPECIFICATIONS
materialSTEEL
heat_treatmentANNEALED
first_leg_angle148.0 DEGREES NOMINAL
first_leg_styleEND RADIUS
first_leg_width0.7500 INCHES NOMINAL IN
first_leg_length0.8750 INCHES NOMINAL IN
second_leg_styleEND RADIUS
second_leg_width0.7500 INCHES NOMINAL IN
special_features1ST LEG 35.0 DEG OFF CENTER
style_designatorANGLE
second_leg_length2.3120 INCHES NOMINAL IN
surface_treatmentCADMIUM
NSN5340-00-213-2150
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: E1046-29-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.3750 INCHES NOMINAL IN
•
HEAT TREATMENT: ANNEALED
•
SECOND LEG END RADIUS: 0.3750 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG THICKNESS: 0.0620 INCHES NOMINAL IN
•
FIRST LEG STYLE: END RADIUS
•
FIRST LEG ANGLE: 148.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.3750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.3750 INCHES NOMINAL IN
HEAT TREATMENTANNEALED
SECOND LEG END RADIUS0.3750 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG THICKNESS0.0620 INCHES NOMINAL IN
FIRST LEG STYLEEND RADIUS
FIRST LEG ANGLE148.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.3750 INCHES NOMINAL IN
SPECIAL FEATURES1ST LEG 35.0 DEG OFF CENTER
FIRST LEG END RADIUS0.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
110 1-17/64Interchangeable
interchangeable cross-reference
interchangeable
C12281Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
2808Z364Interchangeable
interchangeable cross-reference
interchangeable
26925Interchangeable
interchangeable cross-reference
interchangeable
41-181Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy E1046-29-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is E1046-29-1?
E1046-29-1 is a BRACKET,ANGLE.
What parts can replace E1046-29-1?
There are 18 known substitutes for E1046-29-1: 110 1-17/64, C12281, 1302 and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for E1046-29-1?
E1046-29-1 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-213-2150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — E1046-29-1

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026