PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 41-181
41-181 ✓ Verified by PartsTable
Clementoni · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLATE,TELETYPEWRITER RETRACTOR is a Clementoni industrial component. Key specifications include material: FIBER AND RUBBER BODY, style_designator: COG OR NOTCHED, cross-sectional_size: 5L, strengthening_feature: FIBER CORD, nominal_effective_outside_length: 55.000 INCHES IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-213-2150, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
41-181
NSN: 5340-00-213-2150
FSC: 5340
CAGE: 00198 — PRATT & WHITNEY CANADA CORP DIV PRATT & WHITNEY CANADA CORP. (CAN)
SPECIFICATIONS
materialFIBER AND RUBBER BODY
style_designatorCOG OR NOTCHED
cross-sectional_size5L
strengthening_featureFIBER CORD
nominal_effective_outside_length55.000 INCHES IN
NSN5340-00-213-2150
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 41-181 MFR: Clementoni ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.3750 INCHES NOMINAL IN
•
HEAT TREATMENT: ANNEALED
•
SECOND LEG END RADIUS: 0.3750 INCHES NOMINAL IN
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
FIRST LEG THICKNESS: 0.0620 INCHES NOMINAL IN
•
FIRST LEG STYLE: END RADIUS
•
FIRST LEG ANGLE: 148.0 DEGREES NOMINAL
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH: 0.3750 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.3750 INCHES NOMINAL IN
HEAT TREATMENTANNEALED
SECOND LEG END RADIUS0.3750 INCHES NOMINAL IN
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
FIRST LEG THICKNESS0.0620 INCHES NOMINAL IN
FIRST LEG STYLEEND RADIUS
FIRST LEG ANGLE148.0 DEGREES NOMINAL
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.3750 INCHES NOMINAL IN
SPECIAL FEATURES1ST LEG 35.0 DEG OFF CENTER
FIRST LEG END RADIUS0.3750 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
110 1-17/64Interchangeable
interchangeable cross-reference
interchangeable
C12281Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
2808Z364Interchangeable
interchangeable cross-reference
interchangeable
26925Interchangeable
interchangeable cross-reference
interchangeable
41-181Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 41-181?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 41-181?
41-181 is a PLATE,TELETYPEWRITER RETRACTOR manufactured by Clementoni.
What parts can replace 41-181?
There are 19 known substitutes for 41-181: 110 1-17/64, C12281, 1302 and 16 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 41-181?
41-181 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-213-2150. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 41-181

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026