PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DS14243-08PN
DS14243-08PN ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL, overall_width: 9.5 MILLIMETERS NOMINAL MM, material_thickness: 1.3 MILLIMETERS NOMINAL MM, center_to_center_distance_between_loop_and_mounting_hole: 12.6 MILLIMETERS NOMINAL MM. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-396-2757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DS14243-08PN
NSN: 5340-01-396-2757
FSC: 5340
CAGE: 0U583 — SAE INTERNATIONAL DBA SAE INTERNATIONAL (USA)
SPECIFICATIONS
materialPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
overall_width9.5 MILLIMETERS NOMINAL MM
material_thickness1.3 MILLIMETERS NOMINAL MM
center_to_center_distance_between_loop_and_mounting_hole12.6 MILLIMETERS NOMINAL MM
NSN5340-01-396-2757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DS14243-08PN MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: PLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
•
MATERIAL THICKNESS: 1.3 MILLIMETERS NOMINAL MM
•
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 12.6 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALPLASTIC POLYHEXAMETHYLENE ADIPAMIDE OVERALL
MATERIAL THICKNESS1.3 MILLIMETERS NOMINAL MM
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE12.6 MILLIMETERS NOMINAL MM
OVERALL WIDTH9.5 MILLIMETERS NOMINAL MM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 4
SAE-AS25281Upgraded Successor
successor cross-reference
successor
10117391Upgraded Successor
successor cross-reference
successor
137-14160-03Upgraded Successor
successor cross-reference
successor
SAE-AS23190Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DS14243-08PN?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DS14243-08PN?
DS14243-08PN is a CLAMP,LOOP.
What parts can replace DS14243-08PN?
There are 4 known substitutes for DS14243-08PN: SAE-AS25281, 10117391, 137-14160-03 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DS14243-08PN?
DS14243-08PN is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-396-2757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DS14243-08PN

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026