PartsTable
Technical Data Sheet
Download PDF

DN60-0011-SK — PARTS KIT,SEAL REPLACEMENT,MECHA

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DN60-0011-SK: PARTS KIT,SEAL REPLACEMENT,MECHA.

PARTS KIT,SEAL REPLACEMENT,MECHA. Key specifications include document_type: ENGINEERING DRAWING, end_item_name: VALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS), supply_items_and_quantities: DN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1, part_name_assigned_by_controlling_agency: KIT,SEAL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-621-8679, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DN60-0011-SK
NSN: 5330-01-621-8679
FSC: 5330 — Packing and Gasket Materials
CAGE: 5P967 — DANTE VALVE COMPANY (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
end_item_nameVALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS)
component_quantity4
supply_items_and_quantitiesDN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1
part_name_assigned_by_controlling_agencyKIT,SEAL
NSN5330-01-621-8679
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DN60-0011-SK MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COMPONENT QUANTITY: 4
•
DOCUMENT TYPE: ENGINEERING DRAWING
•
SUPPLY ITEMS AND QUANTITIES: DN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1
•
END ITEM NAME: VALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS)
TECHNICAL CHARACTERISTICS
COMPONENT QUANTITY4
DOCUMENT TYPEENGINEERING DRAWING
SUPPLY ITEMS AND QUANTITIESDN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1
END ITEM NAMEVALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS)
PART NAME ASSIGNED BY CONTROLLING AGENCYKIT,SEAL
SUBSTITUTES & CROSS-REFERENCES 2
DN60-0011Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
DN60-0011 IT 2,7,14,22Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DN60-0011-SK?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DN60-0011-SK?
DN60-0011-SK is a PARTS KIT,SEAL REPLACEMENT,MECHA.
What parts can replace DN60-0011-SK?
There are 2 known substitutes for DN60-0011-SK: DN60-0011, DN60-0011 IT 2,7,14,22. Substitute compatibility should be verified for your specific system.
What is the NSN for DN60-0011-SK?
DN60-0011-SK is cataloged in the U.S. Government catalog under NSN 5330-01-621-8679. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DN60-0011-SK