PartsTable
Technical Data Sheet
Download PDF

DN60-0011 — VALVE,SAFETY RELIEF

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

DN60-0011: VALVE,SAFETY RELIEF.

The VALVE,SAFETY RELIEF is a the manufacturer industrial component. Key specifications include document_type: ENGINEERING DRAWING, end_item_name: VALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS), supply_items_and_quantities: DN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1, criticality_code_justification: ZZZY, part_name_assigned_by_controlling_agency: KIT,SEAL, reference_number_differentiating_characteristics: MATERIAL WILL BE IN ACCORDANCE WITH NAVSUP-WSS ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-621-8679, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DN60-0011
NSN: 5330-01-621-8679
NIINs: 016218679, 017007692
FSC: 5330 — Packing and Gasket Materials
CAGE: 5P967 — DANTE VALVE COMPANY (USA)
SPECIFICATIONS
document_typeENGINEERING DRAWING
end_item_nameVALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS)
component_quantity4
supply_items_and_quantitiesDN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1
criticality_code_justificationZZZY
part_name_assigned_by_controlling_agencyKIT,SEAL
reference_number_differentiating_characteristicsMATERIAL WILL BE IN ACCORDANCE WITH NAVSUP-WSS ACTIVITY HX QUALITY CONTROL, MANUFACTURING AND TESTING SPECIFICATIONS
NSN5330-01-621-8679
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DN60-0011 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
COMPONENT QUANTITY: 4
•
DOCUMENT TYPE: ENGINEERING DRAWING
•
SUPPLY ITEMS AND QUANTITIES: DN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1
•
END ITEM NAME: VALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS)
TECHNICAL CHARACTERISTICS
COMPONENT QUANTITY4
DOCUMENT TYPEENGINEERING DRAWING
SUPPLY ITEMS AND QUANTITIESDN60-6-27SS 1, DN60-8-28SS 2, DN60-6-25SS 2, DN60-8-26SS 1
END ITEM NAMEVALVE,ANGLE RELIEF (DNX62FF SERIES 6R8 W/BELLOWS)
PART NAME ASSIGNED BY CONTROLLING AGENCYKIT,SEAL
SUBSTITUTES & CROSS-REFERENCES 1
DN60-0011 IT 2,7,14,22Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy DN60-0011?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DN60-0011?
DN60-0011 is a VALVE,SAFETY RELIEF.
What parts can replace DN60-0011?
There is 1 known substitute for DN60-0011: DN60-0011 IT 2,7,14,22. Substitute compatibility should be verified for your specific system.
What is the NSN for DN60-0011?
DN60-0011 is cataloged in the U.S. Government catalog under NSN 5330-01-621-8679. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DN60-0011