PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DL211
DL211 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLEAT,MOTOR MOUNT is a the manufacturer industrial component. Key specifications include height: 0.095 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, material: STEEL COMP 416, hole_diameter: 0.128 INCHES NOMINAL IN, shank_diameter: 0.230 INCHES NOMINAL IN, furnished_items: LOCKNUT, effective_height: 0.052 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-976-5548, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DL211
NSN: 5340-00-976-5548
FSC: 5340
CAGE: 29964 — ALLIED DEVICES CORP DBA ABSOLUTE PRECISION CO (USA)
SPECIFICATIONS
height0.095 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
materialSTEEL COMP 416
hole_diameter0.128 INCHES NOMINAL IN
shank_diameter0.230 INCHES NOMINAL IN
furnished_itemsLOCKNUT
effective_height0.052 INCHES MAXIMUM IN
outside_diameter0.375 INCHES NOMINAL IN
special_featuresMOUNTING SCREW PART NUMBER Y1-4-T NOT INCLUDED
style_designatorROUND OR ROUND W/ONE FLAT SIDE
end_item_identificationAIRCRAFT MODELS,P-3A,P3B,P-3C A
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE
general_characteristics_item_descriptionSTAINLESS STEEL 416,PASSIVATED FINISH,0.375 IN. OD,0.100 IN. THK IN
NSN5340-00-976-5548
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: DL211 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FURNISHED ITEMS: LOCKNUT
•
MATERIAL: STEEL COMP 416
•
OUTSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
SHANK DIAMETER: 0.230 INCHES NOMINAL IN
•
HOLE DIAMETER: 0.128 INCHES NOMINAL IN
•
EFFECTIVE HEIGHT: 0.052 INCHES MAXIMUM IN
•
HEIGHT: 0.095 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESMOUNTING SCREW PART NUMBER Y1-4-T NOT INCLUDED
FURNISHED ITEMSLOCKNUT
MATERIALSTEEL COMP 416
OUTSIDE DIAMETER0.375 INCHES NOMINAL IN
SHANK DIAMETER0.230 INCHES NOMINAL IN
HOLE DIAMETER0.128 INCHES NOMINAL IN
EFFECTIVE HEIGHT0.052 INCHES MAXIMUM IN
HEIGHT0.095 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE
STYLE DESIGNATORROUND OR ROUND W/ONE FLAT SIDE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 11
423569Upgraded Successor
successor cross-reference
successor
5305000423569Interchangeable
interchangeable cross-reference
interchangeable
160797Interchangeable
interchangeable cross-reference
interchangeable
700682Interchangeable
interchangeable cross-reference
interchangeable
72-6970-021Interchangeable
interchangeable cross-reference
interchangeable
L211Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy DL211?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DL211?
DL211 is a CLEAT,MOTOR MOUNT.
What parts can replace DL211?
There are 11 known substitutes for DL211: 423569, 5305000423569, 160797 and 8 more. Substitute compatibility should be verified for your specific system.
Is DL211 still available?
DL211 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DL211

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026