PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 5305000423569
5305000423569 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1050 OVERALL, head_style: HEXAGON, head_height: 0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.594 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN, fastener_length: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-042-3569, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
5305000423569
NSN: 5305-00-042-3569
FSC: 5305
CAGE: A00AM — E.C.A ETABLISSEMENT CENTRAL DES APPROVISIONNEMENTS DES FORCES ARMEES ROYALES
SPECIFICATIONS
materialSTEEL COMP 1010 OR STEEL COMP 1020 OR STEEL COMP 1050 OVERALL
head_styleHEXAGON
head_height0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
thread_class2A A
thread_length0.594 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
fastener_length0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
washer_quantity1
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OR ZINC OVERALL
width_between_flats0.552 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
internal_drive_styleSLOT
primary_washer_styleFLAT EXTERNAL TEETH
NSN5305-00-042-3569
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 5305000423569 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
•
THREAD QUANTITY PER INCH: 16
•
WIDTH BETWEEN FLATS: 0.552 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.594 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
•
PRIMARY WASHER MATERIAL THICKNESS: 0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
•
WASHER QUANTITY: 1
•
NOMINAL THREAD DIAMETER: 0.375 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 1,CL 3 FED SPEC 1ST TREATMENT RESPONSE OR QQ-Z-325,TY 1,CL 3 FED SPEC 2ND TREATMENT RESPONSE OVERALL
THREAD QUANTITY PER INCH16
WIDTH BETWEEN FLATS0.552 INCHES MINIMUM AND 0.562 INCHES MAXIMUM IN
FASTENER LENGTH0.719 INCHES MINIMUM AND 0.750 INCHES MAXIMUM IN
THREAD LENGTH0.594 INCHES MINIMUM AND 0.719 INCHES MAXIMUM IN
PRIMARY WASHER MATERIAL THICKNESS0.032 INCHES MINIMUM AND 0.040 INCHES MAXIMUM IN
WASHER QUANTITY1
NOMINAL THREAD DIAMETER0.375 INCHES IN
HEAD HEIGHT0.270 INCHES MINIMUM AND 0.295 INCHES MAXIMUM IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
DL211Interchangeable
interchangeable cross-reference
interchangeable
42356-9Interchangeable
interchangeable cross-reference
interchangeable
L2-11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 5305000423569?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 5305000423569?
5305000423569 is a SCREW,ASSEMBLED WASHER.
What parts can replace 5305000423569?
There are 3 known substitutes for 5305000423569: DL211, 42356-9, L2-11. Substitute compatibility should be verified for your specific system.
What is the NSN for 5305000423569?
5305000423569 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-042-3569. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 5305000423569

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026