PartsTable
Technical Data Sheet
PartsTable / COMPONENT / DIN625-16012

DIN625-16012 — Technical Data Sheet

✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, bore_shape: STRAIGHT, bore_diameter: 60.0 MILLIMETERS NOMINAL MM, overall_width: 11.0 MILLIMETERS NOMINAL MM, alignment_type: RIGID, load_direction: RADIAL. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-01-324-8888, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
DIN625-16012
NSN: 3110-01-324-8888
FSC: 3110
CAGE: 52676 — SKF USA INC. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
bore_shapeSTRAIGHT
bore_diameter60.0 MILLIMETERS NOMINAL MM
overall_width11.0 MILLIMETERS NOMINAL MM
alignment_typeRIGID
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
overall_outside_diameter95.0 MILLIMETERS NOMINAL MM
internal_fit-up_designationSTANDARD
retainer_fabrication_methodPRESSED
standard_tolerance_designationABEC NO.1
NSN3110-01-324-8888
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: DIN625-16012 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
BORE DIAMETER: 60.0 MILLIMETERS NOMINAL MM
•
ALIGNMENT TYPE: RIGID
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
MATERIAL: STEEL OVERALL
•
OVERALL OUTSIDE DIAMETER: 95.0 MILLIMETERS NOMINAL MM
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
BORE DIAMETER60.0 MILLIMETERS NOMINAL MM
ALIGNMENT TYPERIGID
SURFACE FINISHGROUND
OVERALL WIDTH11.0 MILLIMETERS NOMINAL MM
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
MATERIALSTEEL OVERALL
OVERALL OUTSIDE DIAMETER95.0 MILLIMETERS NOMINAL MM
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 10
160-12AInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
160-12InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
31J16012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
82052InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
S690022InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
MIL-DTL-6000InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy DIN625-16012?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is DIN625-16012?
DIN625-16012 is a BEARING,BALL,ANNULAR.
What parts can replace DIN625-16012?
There are 10 known substitutes for DIN625-16012: 160-12A, 160-12, 31J16012 and 7 more. Substitute compatibility should be verified for your specific system.
What is the NSN for DIN625-16012?
DIN625-16012 is cataloged in the Federal Logistics Information System under NSN 3110-01-324-8888. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — DIN625-16012

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: October 2026