Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW
The HOUSING,CENTRIFUGAL FAN is a the manufacturer thermal management component critical for maintaining optimal operating temperatures in enterprise hardware. Key specifications include inside_diameter: 24.61 MILLIMETERS MINIMUM AND 26.19 MILLIMETERS MAXIMUM MM, outside_diameter: 33.35 MILLIMETERS MINIMUM AND 34.93 MILLIMETERS MAXIMUM MM, end_item_identification: C101-MIRLO AIRPLANE, media_for_which_designed: FUEL AND OIL FIRST RESPONSE, cross-sectional_shape_style: ROUND, measuring_method_and_length: 4.0 INCHES NOMINAL OVERALL IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-200-0365, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
MIL-DTL-6000
NSN:4720-00-200-0365 FSC:4720 CAGE:81349 — MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M
SPECIFICATIONS
inside_diameter
24.61 MILLIMETERS MINIMUM AND 26.19 MILLIMETERS MAXIMUM MM
outside_diameter
33.35 MILLIMETERS MINIMUM AND 34.93 MILLIMETERS MAXIMUM MM
end_item_identification
C101-MIRLO AIRPLANE
media_for_which_designed
FUEL AND OIL FIRST RESPONSE
cross-sectional_shape_style
ROUND
measuring_method_and_length
4.0 INCHES NOMINAL OVERALL IN
part_name_assigned_by_controlling_agency
HOSE,RUBBER, AIRCRAFT
NSN
4720-00-200-0365
COMPONENT DIAGRAM
KEY FEATURES
•
MEDIA FOR WHICH DESIGNED: FUEL/OIL, HYDROCARBON SINGLE RESPONSE
•
HYDROSTATIC TEST PRESSURE: 450.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
LAYER COMPOSITION AND LOCATION: 1ST LAYER WOVEN COTTON WITH INTERWOVEN STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
•
OUTSIDE DIAMETER: 0.594 INCHES NOMINAL IN
•
BURST TEST PRESSURE: 900.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
•
VACUUM IN TORR: 254.0
•
MATERIAL: RUBBER SYNTHETIC TUBE
TYPICAL APPLICATIONS
Server thermal management and cooling
Hot-swap fan replacement in production environments
Redundant cooling for high-availability systems
TECHNICAL CHARACTERISTICS (FLIS)
MEDIA FOR WHICH DESIGNED
FUEL/OIL, HYDROCARBON SINGLE RESPONSE
HYDROSTATIC TEST PRESSURE
450.0 POUNDS PER SQUARE INCH SINGLE RESPONSE LBS
SPECIAL FEATURES
REQUISITIONER MUST SPECIFY THE REQUIRED LENGTH OF ITEM REQUIRED
LAYER COMPOSITION AND LOCATION
1ST LAYER WOVEN COTTON WITH INTERWOVEN STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is MIL-DTL-6000?
MIL-DTL-6000 is a HOUSING,CENTRIFUGAL FAN.
What parts can replace MIL-DTL-6000?
There are 2 known substitutes for MIL-DTL-6000: 30R4TYPE1, M6000C. Substitute compatibility should be verified for your specific system.
What is the NSN for MIL-DTL-6000?
MIL-DTL-6000 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-00-200-0365. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.