PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D8523841REVAPC42
D8523841REVAPC42 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-187-3635, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D8523841REVAPC42
NSN: 5330-00-187-3635
FSC: 5330
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
center_hole_diameter0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5330-00-187-3635
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D8523841REVAPC42 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 36
3379581Interchangeable
interchangeable cross-reference
interchangeable
3379581-1Interchangeable
interchangeable cross-reference
interchangeable
26945Interchangeable
interchangeable cross-reference
interchangeable
2100-811724REVCPC11Interchangeable
interchangeable cross-reference
interchangeable
2100-811715REVEPC12Interchangeable
interchangeable cross-reference
interchangeable
2100-811785REVAPC11Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D8523841REVAPC42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D8523841REVAPC42?
D8523841REVAPC42 is a PACKING,PREFORMED.
What parts can replace D8523841REVAPC42?
There are 36 known substitutes for D8523841REVAPC42: 3379581, 3379581-1, 26945 and 33 more. Substitute compatibility should be verified for your specific system.
Is D8523841REVAPC42 still available?
D8523841REVAPC42 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D8523841REVAPC42

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026