PartsTable
Technical Data Sheet
PartsTable / O-RING / 2100-811715REVEPC12
2100-811715REVEPC12 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include center_hole_diameter: 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-054-6930, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
2100-811715REVEPC12
NSN: 5331-00-054-6930
FSC: 5331 — O-RING
CAGE: 82126 — MARE ISLAND NAVAL SHIPYARD (USA)
SPECIFICATIONS
center_hole_diameter0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-054-6930
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 2100-811715REVEPC12 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER0.544 INCHES MINIMUM AND 0.554 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
1281-3018Interchangeable
interchangeable cross-reference
interchangeable
H57324PC30Interchangeable
interchangeable cross-reference
interchangeable
D8523841REVAPC42Interchangeable
interchangeable cross-reference
interchangeable
2100-811728REVFPC5Interchangeable
interchangeable cross-reference
interchangeable
2100-811765REVEPC12Interchangeable
interchangeable cross-reference
interchangeable
2100-811699REVAPC5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 2100-811715REVEPC12?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 2100-811715REVEPC12?
2100-811715REVEPC12 is a PACKING,PREFORMED.
What parts can replace 2100-811715REVEPC12?
There are 9 known substitutes for 2100-811715REVEPC12: 1281-3018, H57324PC30, D8523841REVAPC42 and 6 more. Substitute compatibility should be verified for your specific system.
Is 2100-811715REVEPC12 still available?
2100-811715REVEPC12 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 2100-811715REVEPC12

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026