PartsTable
Technical Data Sheet
PartsTable / COMPONENT / D60-971-27PC42
D60-971-27PC42 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The WASHER,SPRING TENSION is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1075 OVERALL, hole_diameter: 1.575 INCHES NOMINAL IN, overall_height: 0.140 INCHES NOMINAL IN, outside_diameter: 2.028 INCHES NOMINAL IN, material_thickness: 0.022 INCHES NOMINAL IN, material_document_and_classification: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5310-00-019-9154, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D60-971-27PC42
NSN: 5310-00-019-9154
FSC: 5310
CAGE: 96169 — ELECTRIC BOAT CORPORATION DIV GENERAL DYNAMICS ELECTRIC BOAT (USA)
SPECIFICATIONS
materialSTEEL COMP 1075 OVERALL
hole_diameter1.575 INCHES NOMINAL IN
overall_height0.140 INCHES NOMINAL IN
outside_diameter2.028 INCHES NOMINAL IN
material_thickness0.022 INCHES NOMINAL IN
material_document_and_classificationAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5310-00-019-9154
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: D60-971-27PC42 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 1.575 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
OUTSIDE DIAMETER: 2.028 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1075 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER1.575 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
OVERALL HEIGHT0.140 INCHES NOMINAL IN
OUTSIDE DIAMETER2.028 INCHES NOMINAL IN
MATERIALSTEEL COMP 1075 OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
5300112811Interchangeable
interchangeable cross-reference
interchangeable
112811Interchangeable
interchangeable cross-reference
interchangeable
811-19Interchangeable
interchangeable cross-reference
interchangeable
18134Interchangeable
interchangeable cross-reference
interchangeable
W2028-022Interchangeable
interchangeable cross-reference
interchangeable
26271Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D60-971-27PC42?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D60-971-27PC42?
D60-971-27PC42 is a WASHER,SPRING TENSION.
What parts can replace D60-971-27PC42?
There are 12 known substitutes for D60-971-27PC42: 5300112811, 112811, 811-19 and 9 more. Substitute compatibility should be verified for your specific system.
Is D60-971-27PC42 still available?
D60-971-27PC42 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D60-971-27PC42

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026