PartsTable
Technical Data Sheet
Download PDF

811-19 — HEATING ELEMENT,ELECTRICAL,NONIM

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

811-19: HEATING ELEMENT,ELECTRICAL,NONIM.

HEATING ELEMENT,ELECTRICAL,NONIM. Key specifications include end_item_identification: CVN 78 PWH SINE528 CONTROLLER, part_name_assigned_by_controlling_agency: BLOWER SUCTION GASKET. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-1074, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 811-19
NSN: 5331-00-166-1074
NIINs: 001661074, 001806612, 005750738, 005996268, 009448242, 011270059, 013127139, 016521421
FSC: 5331 — O-ring
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
end_item_identificationCVN 78 PWH SINE528 CONTROLLER
part_name_assigned_by_controlling_agencyBLOWER SUCTION GASKET
NSN5331-00-166-1074
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 811-19 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
OUTSIDE DIAMETER1.114 INCHES MINIMUM AND 1.146 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.914 INCHES MINIMUM AND 0.934 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 8
934273Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
2-119 V747-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
M83248-1-119ESReference document
Same NSN cross-reference
Reference document — Secondary reference
PRP568-119-954-70Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
39811974Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
AS3209-119Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedNo demilitarization required
Ready to buy 811-19?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 811-19?
811-19 is a HEATING ELEMENT,ELECTRICAL,NONIM. It is classified as a MRO (MRO_GENERAL).
What parts can replace 811-19?
There are 8 known substitutes for 811-19: 934273, 2-119 V747-75, M83248-1-119ES and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 811-19?
811-19 is cataloged in the U.S. Government catalog under NSN 5331-00-166-1074. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 811-19