PartsTable
Technical Data Sheet
PartsTable / O-RING / D49445-VTN ITEM 10
D49445-VTN ITEM 10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, temp_rating: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 8.454 INCHES MINIMUM AND 8.570 INCHES MAXIMUM IN, center_hole_diameter: 8.184 INCHES MINIMUM AND 8.284 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-005-3202, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D49445-VTN ITEM 10
NSN: 5331-01-005-3202
FSC: 5331 — O-RING
CAGE: 34889 — HUNT VALVE COMPANY INC DBA UNION FLONETICS (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
temp_rating-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter8.454 INCHES MINIMUM AND 8.570 INCHES MAXIMUM IN
center_hole_diameter8.184 INCHES MINIMUM AND 8.284 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
NSN5331-01-005-3202
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D49445-VTN ITEM 10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CENTER HOLE DIAMETER: 8.184 INCHES MINIMUM AND 8.284 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
OUTSIDE DIAMETER: 8.454 INCHES MINIMUM AND 8.570 INCHES MAXIMUM IN
•
TEMP RATING: -15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
•
CROSS-SECTIONAL HEIGHT: 0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CENTER HOLE DIAMETER8.184 INCHES MINIMUM AND 8.284 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER FLUOROCARBON CLASS FPM
OUTSIDE DIAMETER8.454 INCHES MINIMUM AND 8.570 INCHES MAXIMUM IN
TEMP RATING-15.0 FAHRENHEIT AND 400.0 FAHRENHEIT DEGF
CROSS-SECTIONAL HEIGHT0.135 INCHES MINIMUM AND 0.143 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
30808989 ITEM 23Interchangeable
interchangeable cross-reference
interchangeable
N-999-6082-A-007 ITEM 12Interchangeable
interchangeable cross-reference
interchangeable
M82348/1-136Interchangeable
interchangeable cross-reference
interchangeable
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
M83248-1-451Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-451Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy D49445-VTN ITEM 10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D49445-VTN ITEM 10?
D49445-VTN ITEM 10 is a O-RING.
What parts can replace D49445-VTN ITEM 10?
There are 34 known substitutes for D49445-VTN ITEM 10: 30808989 ITEM 23, N-999-6082-A-007 ITEM 12, M82348/1-136 and 31 more. Substitute compatibility should be verified for your specific system.
Is D49445-VTN ITEM 10 still available?
D49445-VTN ITEM 10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D49445-VTN ITEM 10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026