PartsTable
Technical Data Sheet

30808989 ITEM 23 — Technical Data Sheet

✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER FLUOROCARBON CLASS FPM, hardness_rating: 75.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN, center_hole_diameter: 1.970 INCHES MINIMUM AND 2.004 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System under NSN 5331-00-167-5123, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
30808989 ITEM 23
NSN: 5331-00-167-5123
FSC: 5331 — O-RING
CAGE: 03847 — WARREN CONTROLS, INC. (USA)
SPECIFICATIONS
materialRUBBER FLUOROCARBON CLASS FPM
hardness_rating75.0 SHORE DUROMETER A NOMINAL
outside_diameter2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN
center_hole_diameter1.970 INCHES MINIMUM AND 2.004 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-167-5123
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 30808989 ITEM 23 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
•
CENTER HOLE DIAMETER: 1.970 INCHES MINIMUM AND 2.004 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
OUTSIDE DIAMETER: 2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIALRUBBER FLUOROCARBON CLASS FPM
CENTER HOLE DIAMETER1.970 INCHES MINIMUM AND 2.004 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
OUTSIDE DIAMETER2.170 INCHES MINIMUM AND 2.216 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 42
AS3085-012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M83248/1-012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
9469127712InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
M83248/1-129InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
ST1050-129InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
108838InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 30808989 ITEM 23?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 30808989 ITEM 23?
30808989 ITEM 23 is a O-RING.
What parts can replace 30808989 ITEM 23?
There are 42 known substitutes for 30808989 ITEM 23: AS3085-012, M83248/1-012, 9469127712 and 39 more. Substitute compatibility should be verified for your specific system.
Is 30808989 ITEM 23 still available?
30808989 ITEM 23 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 30808989 ITEM 23