PartsTable
Technical Data Sheet
PartsTable / O-RING / D11400-SW (70/30) ITEM 3
D11400-SW (70/30) ITEM 3 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The D11400-SW (70/30) ITEM 3 is a the manufacturer industrial component. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-626-6210, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
D11400-SW (70/30) ITEM 3
NSN: 5331-01-626-6210
FSC: 5331 — O-RING
CAGE: 65079 — DANCO VALVE COMPANY (USA)
SPECIFICATIONS
Part NumberD11400-SW (70/30) ITEM 3
NSN5331-01-626-6210
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: D11400-SW (70/30) ITEM 3 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE-AMS7259 ASSN STD SINGLE MATERIAL RESPONSE AND SAE-AS3581 ASSN STD SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL HEIGHT: 0.09375 INCHES NOMINAL IN
•
PERIPHERAL DIAMETER: 1.6875 INCHES NOMINAL IN
•
COLOR: BLACK OR BROWN
•
CENTER HOLE DIAMETER: 1.5 INCHES NOMINAL IN
•
TEMP RATING: -20.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE-AMS7259 ASSN STD SINGLE MATERIAL RESPONSE AND SAE-AS3581 ASSN STD SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL HEIGHT0.09375 INCHES NOMINAL IN
PERIPHERAL DIAMETER1.6875 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCYO-RING
COLORBLACK OR BROWN
CENTER HOLE DIAMETER1.5 INCHES NOMINAL IN
TEMP RATING-20.0 FAHRENHEIT AND 200.0 FAHRENHEIT DEGF
END ITEM IDENTIFICATIONVALVE,ANGLE
MATERIALRUBBER FLUOROCARBON CLASS FPM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
D50-0013 ITEM 3Interchangeable
interchangeable cross-reference
interchangeable
1736931Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-128Interchangeable
interchangeable cross-reference
interchangeable
4400171-1280Interchangeable
interchangeable cross-reference
interchangeable
4400171-1280CPInterchangeable
interchangeable cross-reference
interchangeable
MIL-R-83248/2Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy D11400-SW (70/30) ITEM 3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is D11400-SW (70/30) ITEM 3?
D11400-SW (70/30) ITEM 3 is a D11400-SW (70/30) ITEM 3.
What parts can replace D11400-SW (70/30) ITEM 3?
There are 6 known substitutes for D11400-SW (70/30) ITEM 3: D50-0013 ITEM 3, 1736931, M83248/2-128 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for D11400-SW (70/30) ITEM 3?
D11400-SW (70/30) ITEM 3 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-01-626-6210. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — D11400-SW (70/30) ITEM 3

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026