PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 4400171-1280CP
4400171-1280CP ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PACKING,PREFORMED is a the manufacturer industrial component. Key specifications include material: RUBBER OVERALL, hardness_rating: 90.0 SHORE DUROMETER A NOMINAL OVERALL, peripheral_diameter: 1.693 INCHES NOMINAL IN, center_hole_diameter: 1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN, elongation_percentage: 125 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-241-1926, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
4400171-1280CP
NSN: 5330-01-241-1926
FSC: 5330
CAGE: 03950 — NAVAL INVENTORY CONTROL POINT MECHANICSBURG (USA)
SPECIFICATIONS
materialRUBBER OVERALL
hardness_rating90.0 SHORE DUROMETER A NOMINAL OVERALL
peripheral_diameter1.693 INCHES NOMINAL IN
center_hole_diameter1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
elongation_percentage125 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
criticality_code_justificationZZZY
material_document_and_classificationMIL-R-83248/2 MIL SPEC ALL MATERIAL RESPONSES OVERALL
reference_number_differentiating_characteristicsCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
NSN5330-01-241-1926
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 4400171-1280CP MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-R-83248/2 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
MATERIAL: RUBBER OVERALL
•
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS: CLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
•
CENTER HOLE DIAMETER: 1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
PERIPHERAL DIAMETER: 1.693 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CRITICALITY CODE JUSTIFICATIONZZZY
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-R-83248/2 MIL SPEC ALL MATERIAL RESPONSES OVERALL
MATERIALRUBBER OVERALL
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICSCLEANING, PACKAGING, AND MARKING IAW MIL-STD-1330D
CENTER HOLE DIAMETER1.475 INCHES MINIMUM AND 1.499 INCHES MAXIMUM IN
ELONGATION PERCENTAGE125 MAXIMUM
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
PERIPHERAL DIAMETER1.693 INCHES NOMINAL IN
HARDNESS RATING90.0 SHORE DUROMETER A NOMINAL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
D50-0013 ITEM 3Interchangeable
interchangeable cross-reference
interchangeable
1736931Interchangeable
interchangeable cross-reference
interchangeable
MIL-R-83248/2Interchangeable
interchangeable cross-reference
interchangeable
M83248/2-128Interchangeable
interchangeable cross-reference
interchangeable
D11400-SW (70/30) ITEM 3Interchangeable
interchangeable cross-reference
interchangeable
4400171-1280Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 4400171-1280CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 4400171-1280CP?
4400171-1280CP is a PACKING,PREFORMED.
What parts can replace 4400171-1280CP?
There are 6 known substitutes for 4400171-1280CP: D50-0013 ITEM 3, 1736931, MIL-R-83248/2 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 4400171-1280CP?
4400171-1280CP is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-241-1926. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 4400171-1280CP

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026