Schedule = wall thickness, NOT diameter Nominal pipe size != actual OD
Sch 40 and Sch 80 same OD, different wall
PRODUCT OVERVIEW
The HOSE ASSEMBLY,NONMETALLIC is a the manufacturer industrial component. Key specifications include flow_angle: 90.0 DEGREES SECOND END, seat_angle: 60.0 DEGREES SECOND END, temp_rating: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF, connection_type: THREADED INTERNAL TUBE SECOND END, inside_diameter: 0.375 INCHES NOMINAL IN, connection_style: SWIVEL NUT, FLARELESS SECOND END. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-531-3884, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
CT HSE 10 001
NSN:4720-01-531-3884 FSC:4720 CAGE:1PWP4 — HAMILTON JET, INC. (USA)
SPECIFICATIONS
flow_angle
90.0 DEGREES SECOND END
seat_angle
60.0 DEGREES SECOND END
temp_rating
-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
connection_type
THREADED INTERNAL TUBE SECOND END
inside_diameter
0.375 INCHES NOMINAL IN
connection_style
SWIVEL NUT, FLARELESS SECOND END
outside_diameter
0.750 INCHES NOMINAL IN
special_features
INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; CLEANED BY AIR MATE SYSTEM
thread_direction
RIGHT-HAND FIRST END
operating_pressure
5000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED LBS
burst_test_pressure
20000.0 POUNDS PER SQUARE INCH LBS
nominal_thread_size
0.375 INCHES FIRST END IN
NSN
4720-01-531-3884
COMPONENT DIAGRAM
KEY FEATURES
•
TEMP RATING: -40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
•
CONNECTION TYPE: THREADED INTERNAL TUBE SECOND END
•
SEAT ANGLE: 60.0 DEGREES FIRST END
•
NOMINAL THREAD SIZE: 0.375 INCHES SECOND END IN
•
THREAD DIRECTION: RIGHT-HAND FIRST END
•
CONNECTION STYLE: SWIVEL NUT, FLARELESS SECOND END
•
END FITTING COMPONENT AND MATERIAL: COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
•
MINIMUM INSIDE BENDING RADIUS: 5.000 INCHES IN
TECHNICAL CHARACTERISTICS (FLIS)
TEMP RATING
-40.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE DEGF
CONNECTION TYPE
THREADED INTERNAL TUBE SECOND END
SEAT ANGLE
60.0 DEGREES FIRST END
NOMINAL THREAD SIZE
0.375 INCHES SECOND END IN
THREAD DIRECTION
RIGHT-HAND FIRST END
CONNECTION STYLE
SWIVEL NUT, FLARELESS SECOND END
END FITTING COMPONENT AND MATERIAL
COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS
MINIMUM INSIDE BENDING RADIUS
5.000 INCHES IN
LAYER COMPOSITION AND LOCATION
1ST LAYER BRAIDED WIRE AND 2ND LAYER MOLDED RUBBER, SYNTHETIC AND 3RD LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CT HSE 10 001?
CT HSE 10 001 is a HOSE ASSEMBLY,NONMETALLIC.
What parts can replace CT HSE 10 001?
There are 4 known substitutes for CT HSE 10 001: 110482, G17, CT HSE 10 001 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CT HSE 10 001?
CT HSE 10 001 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4720-01-531-3884. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.