PartsTable
Technical Data Sheet
PartsTable / COMPONENT / G17
G17 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,THRUST is a the manufacturer industrial component. Key specifications include diameter: 0.375 INCHES NOMINAL IN, material: STEEL OVERALL, end_style: SHORT TWISTED HOOK BOTH ENDS, ring_style: CONCENTRIC, design_type: CLOSED, hook_radius: 0.096 INCHES NOMINAL BOTH ENDS IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1727, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
G17
NSN: 3110-00-156-1727
FSC: 3110
CAGE: 00658 — ABC ACQUISITION COMPANY DBA AETNA BEARING COMPANY (USA)
SPECIFICATIONS
diameter0.375 INCHES NOMINAL IN
materialSTEEL OVERALL
end_styleSHORT TWISTED HOOK BOTH ENDS
ring_styleCONCENTRIC
design_typeCLOSED
hook_radius0.096 INCHES NOMINAL BOTH ENDS IN
joint_styleDIAGONAL JOINT
coil_quantity177
alignment_typeRIGID
overall_height0.7500 INCHES NOMINAL IN
overall_length0.312 INCHES NOMINAL IN
surface_finishGROUND
NSN3110-00-156-1727
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: G17 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL OUTSIDE DIAMETER: 2.5625 INCHES NOMINAL IN
•
SURFACE FINISH: GROUND
•
ALIGNMENT TYPE: RIGID
•
STANDARD TOLERANCE DESIGNATION: AFBMA STD TOLERANCE FOR THRUST BEARINGS
•
BORE SMALLEST DIAMETER: 1.5000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD ALL MATERIAL RESPONSES OVERALL
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL OUTSIDE DIAMETER2.5625 INCHES NOMINAL IN
SURFACE FINISHGROUND
ALIGNMENT TYPERIGID
STANDARD TOLERANCE DESIGNATIONAFBMA STD TOLERANCE FOR THRUST BEARINGS
BORE SMALLEST DIAMETER1.5000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD ALL MATERIAL RESPONSES OVERALL
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL HEIGHT0.7500 INCHES NOMINAL IN
MATERIALSTEEL COMP E51100 OR STEEL COMP E52100 OVERALL
STYLE DESIGNATORGROOVED RACE SURFACE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 27
4417Interchangeable
interchangeable cross-reference
interchangeable
93J700Interchangeable
interchangeable cross-reference
interchangeable
313-001-043Interchangeable
interchangeable cross-reference
interchangeable
M22520/5-55Interchangeable
interchangeable cross-reference
interchangeable
Y102Interchangeable
interchangeable cross-reference
interchangeable
581158-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy G17?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is G17?
G17 is a BEARING,BALL,THRUST.
What parts can replace G17?
There are 27 known substitutes for G17: 4417, 93J700, 313-001-043 and 24 more. Substitute compatibility should be verified for your specific system.
What is the NSN for G17?
G17 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-156-1727. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — G17

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026