PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CS125-1420-8-CR
CS125-1420-8-CR ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The MOUNT,RESILIENT,UTILITY is a the manufacturer industrial component. Key specifications include head_height: 0.015 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, thread_class: 2A LOCATION NOT OTHERWISE SPECIFIED A, head_diameter: 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN, thread_length: 0.300 INCHES MINIMUM AND 0.400 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_length: 0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN, style_designator: FLUSH. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-01-376-2999, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CS125-1420-8-CR
NSN: 5307-01-376-2999
FSC: 5307
CAGE: 66530 — CLICK BOND INC (USA)
SPECIFICATIONS
head_height0.015 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
thread_class2A LOCATION NOT OTHERWISE SPECIFIED A
head_diameter1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
thread_length0.300 INCHES MINIMUM AND 0.400 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_length0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
style_designatorFLUSH
thread_directionRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
surface_treatmentPASSIVATE OVERALL
nominal_thread_size0.250 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
thread_quantity_per_inch20 LOCATION NOT OTHERWISE SPECIFIED
thread_series_designatorUNIFIED NATIONAL COARSE (UNC) NUT THREAD
NSN5307-01-376-2999
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: CS125-1420-8-CR · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD CLASS: 2A LOCATION NOT OTHERWISE SPECIFIED A
•
THREAD DIRECTION: RIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
STYLE DESIGNATOR: FLUSH
•
HEAD DIAMETER: 1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
•
MATERIAL: STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
•
THREAD LENGTH: 0.300 INCHES MINIMUM AND 0.400 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
TECHNICAL CHARACTERISTICS (FLIS)
THREAD CLASS2A LOCATION NOT OTHERWISE SPECIFIED A
THREAD DIRECTIONRIGHT-HAND LOCATION NOT OTHERWISE SPECIFIED
SURFACE TREATMENTPASSIVATE OVERALL
STYLE DESIGNATORFLUSH
OVERALL LENGTH0.480 INCHES MINIMUM AND 0.520 INCHES MAXIMUM IN
HEAD DIAMETER1.230 INCHES MINIMUM AND 1.270 INCHES MAXIMUM IN
MATERIALSTEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 302B OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304 OR STEEL COMP 304L OR STEEL COMP 305 OR STEEL COMP 308 OR STEEL COMP 309 OR STEEL COMP 309S OR STEEL COMP 310 OR STEEL COMP 310S OR STEEL COMP 314 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 OR STEEL COMP 348 OR STEEL COMP 384 OR STEEL COMP 385
THREAD LENGTH0.300 INCHES MINIMUM AND 0.400 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
NOMINAL THREAD SIZE0.250 INCHES LOCATION NOT OTHERWISE SPECIFIED IN
THREAD QUANTITY PER INCH20 LOCATION NOT OTHERWISE SPECIFIED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
CS125-1420-8-CRInterchangeable
interchangeable cross-reference
interchangeable
2202-900-003676Interchangeable
interchangeable cross-reference
interchangeable
9-00002221Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CS125-1420-8-CR?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CS125-1420-8-CR?
CS125-1420-8-CR is a MOUNT,RESILIENT,UTILITY.
What parts can replace CS125-1420-8-CR?
There are 3 known substitutes for CS125-1420-8-CR: CS125-1420-8-CR, 2202-900-003676, 9-00002221. Substitute compatibility should be verified for your specific system.
What is the NSN for CS125-1420-8-CR?
CS125-1420-8-CR is cataloged in the Federal Logistics Information System (FLIS) under NSN 5307-01-376-2999. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CS125-1420-8-CR

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026