PartsTable
Technical Data Sheet
PartsTable / COMPONENT / CM927L14
CM927L14 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The STAY,LOCKING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 0.562 INCHES NOMINAL IN, overall_length: 9.750 INCHES NOMINAL IN, style_designator: FRICTION TYPE, features_provided: RETAINING LUG, surface_treatment: CADMIUM AND CHROMATE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-010-9833, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
CM927L14
NSN: 5340-01-010-9833
FSC: 5340
CAGE: 01930 — AMEROCK CORP P O BOX 900 FREEPORT IL 61032-0900 (USA)
SPECIFICATIONS
materialSTEEL
overall_width0.562 INCHES NOMINAL IN
overall_length9.750 INCHES NOMINAL IN
offset_quantity3
style_designatorFRICTION TYPE
features_providedRETAINING LUG
surface_treatmentCADMIUM AND CHROMATE
material_thickness0.094 INCHES NOMINAL IN
operational_directionLEFT-HAND
mounting_hole_diameter0.263 INCHES NOMINAL IN
surface_treatment_document_and_classificationQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
NSN5340-01-010-9833
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CM927L14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL THICKNESS: 0.094 INCHES NOMINAL IN
•
FEATURES PROVIDED: RETAINING LUG
•
MOUNTING HOLE DIAMETER: 0.263 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE
•
OFFSET QUANTITY: 3
•
STYLE DESIGNATOR: FRICTION TYPE
•
OPERATIONAL DIRECTION: LEFT-HAND
TECHNICAL CHARACTERISTICS (FLIS)
MATERIAL THICKNESS0.094 INCHES NOMINAL IN
FEATURES PROVIDEDRETAINING LUG
MOUNTING HOLE DIAMETER0.263 INCHES NOMINAL IN
SURFACE TREATMENTCADMIUM AND CHROMATE
OFFSET QUANTITY3
STYLE DESIGNATORFRICTION TYPE
OVERALL WIDTH0.562 INCHES NOMINAL IN
OPERATIONAL DIRECTIONLEFT-HAND
OVERALL LENGTH9.750 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
11732614Upgraded Successor
successor cross-reference
successor
4085 4Upgraded Successor
successor cross-reference
successor
4085Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy CM927L14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CM927L14?
CM927L14 is a STAY,LOCKING.
What parts can replace CM927L14?
There are 3 known substitutes for CM927L14: 11732614, 4085 4, 4085. Substitute compatibility should be verified for your specific system.
Is CM927L14 still available?
CM927L14 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CM927L14

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026