PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 11732614
11732614 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BOOT,DUST AND MOISTURE SEAL is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE BODY, thread_class: 2B, thread_length: 0.281 INCHES NOMINAL IN, thread_series: UNS, overall_height: 0.812 INCHES NOMINAL IN, sealing_method: PACKING. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-091-3590, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
11732614
NSN: 5340-01-091-3590
FSC: 5340
CAGE: 19200 — COMBAT CAPABILITIES DEVELOPMENT COMMAND (CCDC) ARMAMENTS CENTER DBA CCDC DIV LOGISTICS RESEARCH AND ENGINEERING DIRECTORATE (USA)
SPECIFICATIONS
materialRUBBER SILICONE BODY
thread_class2B
thread_length0.281 INCHES NOMINAL IN
thread_seriesUNS
overall_height0.812 INCHES NOMINAL IN
sealing_methodPACKING
mounting_methodINTEGRAL THREADED NUT
special_featuresMATERIAL IS TRANSPARENT; NUT IS NICKEL-PLATED BRASS
style_designatorCLOSED END
nominal_thread_size0.875 INCHES IN
base_thread_locationINTERNAL
base_outside_diameter1.108 INCHES NOMINAL IN
NSN5340-01-091-3590
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 11732614 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OPENING INSIDE DIAMETER: 0.735 INCHES NOMINAL IN
•
THREAD SERIES: UNS
•
STYLE DESIGNATOR: CLOSED END
•
MATERIAL: RUBBER SILICONE BODY
•
MOUNTING METHOD: INTEGRAL THREADED NUT
•
BASE THREAD LOCATION: INTERNAL
•
BODY OUTSIDE DIAMETER: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OPENING INSIDE DIAMETER0.735 INCHES NOMINAL IN
THREAD SERIESUNS
STYLE DESIGNATORCLOSED END
MATERIALRUBBER SILICONE BODY
MOUNTING METHODINTEGRAL THREADED NUT
BASE THREAD LOCATIONINTERNAL
OVERALL HEIGHT0.812 INCHES NOMINAL IN
BODY OUTSIDE DIAMETER1.125 INCHES NOMINAL IN
BASE OUTSIDE DIAMETER1.108 INCHES NOMINAL IN
HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTIONACID RESISTANT AND OZONE RESISTANT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
4085Upgraded Successor
successor cross-reference
successor
CM927L14Upgraded Successor
successor cross-reference
successor
05-0235Upgraded Successor
successor cross-reference
successor
6515NCM050359Upgraded Successor
successor cross-reference
successor
8108183Upgraded Successor
successor cross-reference
successor
019-4085-LRUpgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 11732614?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 11732614?
11732614 is a BOOT,DUST AND MOISTURE SEAL.
What parts can replace 11732614?
There are 16 known substitutes for 11732614: 4085, CM927L14, 05-0235 and 13 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 11732614?
11732614 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-091-3590. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 11732614

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026