PartsTable
Technical Data Sheet
PartsTable / MRO / CL-50
CL-50 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CLAMP,COUPLING NUT,ELECTRICAL CO. Key specifications include length: 0.562 INCHES NOMINAL IN, cushion: NOT INCLUDED, material: STEEL OVERALL, body_width: 0.300 INCHES MAXIMUM IN, cubic_measure: 0.056 CUBIC INCHES, hole_diameter: 0.169 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-8721, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ CL-50
NSN: 5340-00-286-8721
FSC: 5340
CAGE: 03743 — EGS ELECTRICAL GROUP APPLETON DIV (USA)
SPECIFICATIONS
length0.562 INCHES NOMINAL IN
cushionNOT INCLUDED
materialSTEEL OVERALL
body_width0.300 INCHES MAXIMUM IN
cubic_measure0.056 CUBIC INCHES
hole_diameter0.169 INCHES NOMINAL IN
hole_quantity1
overall_width0.750 INCHES NOMINAL IN
inclosure_typeENCAPSULATED
overall_height0.875 INCHES NOMINAL IN
overall_length1.000 INCHES NOMINAL IN
terminal_length1.500 INCHES MINIMUM IN
NSN5340-00-286-8721
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: CL-50 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL LOCATION NOT OTHERWISE SPECIFIED
•
STYLE DESIGNATOR: CURVED ARCH
•
INSIDE DIAMETER/ARCH LENGTH: 0.500 INCHES NOMINAL IN
•
CUSHION: NOT INCLUDED
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL LOCATION NOT OTHERWISE SPECIFIED
STYLE DESIGNATORCURVED ARCH
INSIDE DIAMETER/ARCH LENGTH0.500 INCHES NOMINAL IN
CUSHIONNOT INCLUDED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
6481-354122-1Upgraded Successor
successor cross-reference
successor
1332Upgraded Successor
successor cross-reference
successor
CL-50Interchangeable
interchangeable cross-reference
interchangeable
SG210Interchangeable
interchangeable cross-reference
interchangeable
908552-001Interchangeable
interchangeable cross-reference
interchangeable
863-000664Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy CL-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is CL-50?
CL-50 is a CLAMP,COUPLING NUT,ELECTRICAL CO. It is classified as a MRO (MRO_GENERAL).
What parts can replace CL-50?
There are 9 known substitutes for CL-50: 6481-354122-1, 1332, CL-50 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for CL-50?
CL-50 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-286-8721. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — CL-50

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026